Cool-Lux DVR-200 manual Using an AC power adapter optional accessory, Attaching the hand strap

Using an AC power adapter (optional accessory)

1. Connect one end of the AC power adapter to the jack labeled “DC IN”.

2. Connect the other end to an electrical outlet.

Note:

Make sure to use only the AC power adapter specified for the camera. Damage caused by the use of an incorrect adapter is not covered under the warranty.

Using an AC power adapter while transferring images to your computer prevents unexpected automatic power off of the camera.

Attaching the hand strap

To prevent accidental dropping of the camera, always use the hand strap.

Attach the hand strap as follows:

1.Thread the small loop of the hand strap through the strap eyelet on the camera.

2. Pull the large loop through the small loop until the strap is firmly secured.

14