EverFocus EDSR400M instruction manual Alarm duration from 01 seconds to 90 seconds

Page 49

ALARM – RESET TYPE:

Select the type of alarm-reset input to be Normal Close (N.C.) or Normal Open (N.O.)

ALARM DURATION TIME:

Alarm duration from 01 seconds to 90 seconds.

PRE-ALARM OPERATION:

ON: Enables pre-alarm recording,

OFF: Disables pre-alarm recording.

RECORDING SPEED:

Set the recoding speed in pre-alarm duration.

Notice:

The recording quality in pre-alarm duration is the same as recording quality before alarm occurs. If the recorder is not recording before alarm occurs, the recording quality in pre-alarm duration will be the same as instant recording quality.

35

Image 49
Contents EDSR400M Safety Warning Safety Precautions Power Disconnect Important Safeguards Important SafeguardsFor Mobile Digital Single Channel Video Recorder single HDD DVR can be mounted horizontally suspend or support mounted Quick Install GuideEquipment Required Unpack EverythingChoosing the Location DVR Quick Install Guide Connect the Cameras Installing the Cameras and MonitorInstalling the Hard Drive Table of Contents View from Internet/Intranet……………………………………………………………………..52 Product Overview Product Overview and FeaturesSpecifications Front Panel Keypads Front Panel Keypads~ 4 CH1 ~CH4 Shuttle and Jog Dial Display Press this key to switch ON/OFFBack Panel Connections Alarm Input/ OutputMonitor Video in /OutputBack Panel Connections PowerAudio RS232 LANSystem Connection Before InstallationSystem Connection Basic Connections 4Press Menu key to enter SET UP Menu Installation11. RS232/RS485 Setting Motion Record Setting Menu System Setting MenuMenu Motion Record CLOCK/ Language Setting Menu CH1 CH2 CH3 CH4 Title Setting Menu , we define Title Setting MenuDaylight Setting Menu , we define Daylight Setting MenuStop Time Timer Setting Menu Week Start Stop Speed Quality SET SUN Timer Setting MenuStandard OFF Standard OFF SUNNormal Recording MENU, we define Normal Record Setting MenuDisk Full Alarm Recording MENU, we define Alarm Record Setting MenuStandard Secs 60 IPS~5 Alarm -1 Type Alarm -2 Type Alarm -3 Type ALARM-4 Type Normally open connection use pin # 13 and # Alarm outNormally Closed Connection use pin # 13 and # Alarm Circuit Alarm in and alarm resetAlarm Reset Type Alarm -IN Buzzer Setting MenuRecord Archive Setting MENU, we define Archive Setting Menu720x480 TOPNetwork Setting Menu IP Address Network Setting MenuUSER-NAME Password Level NET Mask AddressSequence Setting MENU, we define Sequence Setting MenuSEQ with Quad RS232/RS485 Setting Menu RS232 Baud Rate 11 RS232/RS485 Setting MenuRS485 Stop BIT RS485 Parity None RS485 Data BIT Motion Record Setting Menu Recording Speed Motion Record Setting MenuMotion Record Setting MENU, we define CH ChannelManual Edit SensensitivitySystem Setting MENU, we define System Setting Menu123456 Input Password Instant Recording RecordingPress Record key to start the recording immediately RECRecording Setting Menu Alarm RecordingAlarm 1 Type Alarm 2 Type Alarm 3 Type Alarm 4 Type MenuAlarm duration from 01 seconds to 90 seconds Normal Playback Playing BackPlay REV.PLAYPause Slow Forward/Reverse Playback5Field advance Forward/Reverse Segment Search Playback Search PlaybackSearch Alarm Search Alarm Search PlaybackDate/Time Search Playback Play Copy Copy to Movie File2003/01/01 While displayed as your desired image of choiceStill Image Copy CopyPause Copy Press Search button once to close file Press Pause button once to stop copy imagePress Stop button once to Exit Transmission setting Interface SpecificationsPin assignment of the 9-pin D-SUB connector Remote Control Protocol Page Page Page Remote Controller Remote ControllerAppendix-A APPENDIX- A/Time Lapse Mode Recording TimeWhen Recording with a 160-GB HDD View From Internet/Intranet Basic Operations and Login DisplayMain Screen Page Appendix-C Appendix-C LAN Functional Specification EverFocus