Motorola QIP64xx Series, QIP6200 Series manual There is no video, On the TV screen

Page 46

Problem	Possible Solution
There is no video	Verify that the TV is powered on and set to the
on the TV screen	appropriate input source for the set-top.
	Verify that the set-top is powered on and tuned to an
	authorized digital TV channel.
	Verify that all video cables between the set-top and
	the TV are firmly connected.
	Verify that the coaxial cable feed is firmly connected to
	the set-top and the wall jack.
	If the set-top video output is connected to a home theater
	receiver, verify that the home theater receiver is powered
	on and set to the appropriate input source.
	If the set-top video output is connected to a TV through a
	DVI/HDMI connection, power off the TV and then power
	off the set-top. Wait one second and then power on the
	devices.
	For HDMI connections only, select Restore All Defaults
	to force the TV and the set-top to exchange information
	to automatically determine settings suited for your TV.
	For information about user settings, see “Optimizing
	Your Output Settings."

Not all HDTVs can display every output format (1080i, 720p, 480p, or 480i) available on the set-top. To select a different format:

1Ensure that your set-top is plugged into a power outlet and is turned off.

2Press the MENU key on the front panel. Your settings are displayed on the front panel display.

3Press the ▲ and ▼ keys to display the HDMI/YPbPr OUTPUT setting.

4Press the ► key to cycle through the available output formats until a picture displays on the TV.

40

Image 46

Contents

User Guide Repairs Important Safety Instructions Declaration of Conformity Regulatory InformationCanadian Compliance Software License Software LicenseContact Us Contents QIP6200/QIP64xx User GuideConnecting a Stereo TV and Stereo VCR Connecting a Stereo TVConnecting an A/V Receiver, TV, and VCR Introduction Front Panel QIP6200/64xx Front and Back PanelsFront Panel Description Item DescriptionQIP6200/QIP64xx User Guide Back Panel EnabledBack Panel Description Program not supported by all program guidesDescription Changing Channels Turning Power On and OffAdjusting the Volume Electronic Program GuideWhat is DVR? Digital Video Recorder DVR QIP64XX Models onlySimultaneously Record Two Shows Simultaneously Record Shows and Watch a Recorded ProgramOptimizing Your SET-TOP for HIGH-DEFINITION TV This screen appears if the Hdmi port is active To exit the menu and save your settings, press the Power or Setting Description User SettingsHDMI/YPbPr Closed Restore ALL ON-SCREEN Graphics Connecting Your SET-TOP Important Safety Considerations Hdmi or Ieee 1394 Digital Hdtv and Sdtv Video Connection OptionsComponent video YPbPr Hdtv and Sdtv Video SdtvFollow RF Output SdtvIf You Have Hdtv onlyRecording Your Connections QIP6200/QIP64xx User Guide Connecting Your SET-TOP to AN Hdtv Video only Component Video YPbPr Connecting Hdtv Video OnlyIeee DVI or Hdmi Connecting Your SET-TOP to AN Hdtv Audio only Connecting Hdtv Audio Only Connecting Your SET-TOP to AN A/V Receiver Audio only Connecting an A/V Receiver Audio Only Connecting Your SET-TOP to a Stereo TV Connecting a Stereo TV Connecting Your SET-TOP to a Stereo TV and Stereo VCR QIP6xxx SeriesConnecting a Stereo TV and Stereo VCR Connecting Your SET-TOP to AN A/V RECEIVER, TV, and VCR Connecting an A/V Receiver, TV, and VCR Data Features Data DevicesPower on TroubleshootingProblem Possible Solution Does not workChannels When viewingThere is no audio From the centerThere is no video On the TV screenCaptions, or There are noGraphics, closed Program guidesBars on all four Bars aboveBelow the picture Sides of the pictureVideo is horizontally distorted on the Hdtv screen Set-top is making a humming noiseMgbi