4.10 Hard Disk Setup
HARD DRIVE SETUP
OVERWRITE ENABLED YES
MASTER HDD SIZE 40000MB
MASTER HDD USED 0MB 0%
MASTER HDD FORMAT
SLAVE HDD SIZE
PRESS (¿À), THEN ( )
PRESS( ) TO EXIT
Overwrite Enabled:
If you choose “YES”, the unit will continue recording and overwrite the recorded data when the HDD’s space is full.
If you choose “NO”, the unit will stop recording when the HDD’s space is full.
Master HDD Size:
Indicates the capacity of the primary HDD installed in the unit.
Master HDD Used:
Indicates the percentage of the HDD’s capacity used.
Master HDD Format:
Erases all recorded data in the Master HDD.
The authorized password is requested before formatting. After the unit is formatted, the following message will appear on the screen:
“HARD DISK FORMATTED”.
Note: The unit is featured with one HDD only for the time being.
27 | Chapter4 |