3.Normally closed.
4.Motion +
5.Motion +
In normally open mode, if the cable between the sensor and the unit is cut by an intruder, the unit starts recording. In normally closed mode, if the cable between the sensor and the unit is cut by an intruder, the unit stops recording.
4.12 How to Operate Motion Detection Recording
Follow the steps given below to activate
1.Please go to the “SENSOR SETUP” menu as shown in the figure.
SENSOR SETUP |
|
SENSOR RECORD TIME | 15 |
ALARM OUT TIME | 20 |
TYPE:NORMAL | |
CLOSE |
|
TYPE:NOT | |
INSTALLED |
|
PRESS (¿À), THEN ( ) | |
PRESS( | ) TO EXIT |
2.Select the required motion option.
3.After the selection, please go back to the MAIN MENU and go to “PROGRAMMED RECORD” to activate the alarm setting.
PROGRAMMED RECORD + T T T S S T T T T T T T T T +
0 3 6 9 12 15 18 21 24
PRESS (¿À), THEN ( )
PRESS( ) TO EXIT
Note: Setting “PROGRAMMED RECORD” is neces- sary for starting the operation of motion detection recording.
29 | Chapter4 |