Sherwood R-872 ROOM 2 SOURCE PLAYBACK, When using the buttons on the remote control unit, English

ENGLISH

ROOM 2 SOURCE PLAYBACK

•This function allows enjoying one source in the main room and playing another in a different room at the same time.

•When you connect the multi-room system kit to the IR IN jack of this receiver, you can control this receiver with not only the universal remote control unit but also the ROOM 2 remote control unit in a different room, too. (For details, refer to "CONNECTING MULTI-ROOM SYSTEM KIT" on page 14 and "ROOM 2 Remote Controls" on page 30.)

■Notes:

•The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.

•The HDMI video signals and the component video signals cannot be output to the different room, too.

•You cannot play the ROOM 2 source in any surround mode.

When using the buttons on the remote control unit

1. Turn on the ROOM 2 function.

•ROOM 2 ~ is displayed for several seconds.

•On the ROOM 2 remote control, press the ROOM 2 ON

( I ) button to enter the ROOM 2 ON mode or press the ROOM 2 OFF ( ) button to enter the ROOM 2 OFF mode.

•Each time the ROOM 2 button on the universal remote control is pressed, the ROOM 2 mode changes as follows :

ON : To turn on the ROOM 2 function.

(" " lights up.)

OFF : To turn it off. (" " or " "

goes off depending on the AMP ASSIGN setting.)

■Note :

•When the ROOM 2 mode is set to OFF, you cannot adjust the ROOM 2 volume and tone (bass and treble).

2. Select the desired input as a ROOM 2 source.

•Each time the INPUT button on the universal remote control is pressed, the ROOM 2 input can be selected among MAIN source, TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4.

■When selecting the tuner as a ROOM 2 source

•Tune in the desired preset station using the ROOM 2 remote control.

3. Adjust the ROOM 2 volume.

•You can adjust the volume on the power amplifier assigned to "BACK ← →ROOM 2" or "ROOM 2" when the ROOM 2 speaker terminals are connected to the speakers in a different room. (For details, refer to "When selecting the AMP ASSIGN" on page 52.)

•The MUTE button on the ROOM 2 remote control can be available only when the ROOM 2 function is operating.

4. Adjust the tone (bass and treble) for ROOM 2 source.

•The tone level can be adjusted within the range of -10 ~ +10 dB.

•In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).

•Extreme settings at high volume may damage your speakers.

5. Start play on the component related to the ROOM 2 source.

48