Programming the commands from other remote controls (LEARNING mode)

If the setup codes are not available for your component or you want to program a missing or special function into one button of a device, the learning function enables this remote control to learn the commands from other remote controls.

1. Place this remote control and other remote

control facing each other at a distance of 5 to 15 cm (2 to 6 inches ) apart.

2. Press and hold down the ENTER button and the

desired one of the DEVICE buttons for more than 2 seconds.

Then "LEARN" is displayed on the LCD screen for several seconds

Note :

During setting operation, to exit from the setting mode, press any of the DEVICE buttons.

3. While "LEARN" is displayed, press the ENTER button.

Then "SEL" is flickering.

If "SEL" goes off, start again from the above step 2.

4. While "SEL" is flickering, on this remote control,

press the button corresponding to the function to be learned.

Example: If the function to be learned is playback, press the PLAY() button.

Then "READY" is displayed. Note:

You cannot program a function into some buttons such as DEVICE, MACRO and LIGHT buttons.

5. While "READY" is displayed, on the other

remote control, press the button of the function to be learned.

If the command has been learned successfully, "OK" is displayed and then "SEL" is flickering.

If "ERROR" is displayed and then "SEL" is flickering, it means that for some reason the command was not learned. In this case, repeat the above steps 4 and 5.

Notes :

If an incorrect signal has been sent or, in some cases, the command from other remote control simply cannot be learned.

In some "ERROR" cases, the remote controls just need to be moved closer together or farther apart.

6. While "SEL" is flickering, repeat the above steps

4 and 5 to program all the commands you want to the buttons on this remote control under the same device mode.

To exit from the setting mode, press any of the DEVICE buttons.

7. Repeat the above steps 1 to 6 to program the commands from a different remote control.

8. Operate the newly programmed buttons to make

sure the learning function was performed properly.

23

ENGLISH

Page 23
Image 23
Sherwood R-872 manual English

R-872 specifications

The Sherwood R-872 is a high-performance stereo receiver that offers an impressive combination of features, sound quality, and versatility, making it a valuable addition to any home audio system. Designed with an emphasis on audio fidelity and user convenience, the R-872 stands out as a reliable choice for both audiophiles and casual listeners alike.

One of the main features of the Sherwood R-872 is its robust power output, capable of delivering 100 watts per channel into 8 ohms. This level of power ensures that it can drive a wide range of speakers, from bookshelf models to larger floor-standing units, providing a rich and immersive listening experience. The receiver's built-in amplifier also supports low total harmonic distortion (THD) levels, which guarantees clear and accurate sound reproduction, even at high volumes.

The R-872 is equipped with a variety of connectivity options, making it easy to integrate into modern home entertainment setups. It includes multiple analog inputs for connecting various audio sources, such as CD players, turntables, and streaming devices. Additionally, it features built-in Bluetooth, allowing users to wirelessly stream music from smartphones, tablets, and computers, enhancing its versatility as a central component of any audio system.

Another noteworthy characteristic of the Sherwood R-872 is its sophisticated digital signal processing (DSP) capabilities. With multiple sound presets and adjustable equalization settings, users can tailor the audio output to their preferences, whether they are enjoying music, movies, or gaming. The receiver also offers a convenient headphone output, catering to those who prefer a private listening experience.

In terms of design, the R-872 boasts a sleek and modern aesthetic with an intuitive interface. The front panel features a clear display that provides essential information about the current audio source, volume level, and other settings. The included remote control allows for easy operation from a distance, adding to the overall user-friendly experience.

In summary, the Sherwood R-872 is a versatile and powerful stereo receiver that excels in delivering high-quality audio while accommodating a range of input sources and personal preferences. With its solid performance, modern features, and elegant design, the R-872 is an excellent choice for anyone looking to enhance their home audio setup. Whether you're listening to your favorite albums or enjoying a thrilling movie soundtrack, the R-872 ensures an engaging and enjoyable audio experience.