ENGLISH
When CD, AUX, VIDEO 1~ 4 is selected as an input source
•If the AUDIO MODE is set to the mode other than "DIGITAL" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTING THE INPUT SETUP" on page 56.)
4. Press the AUDIO ASSIGN button.
•"AUDIO ~ " is displayed for several seconds.
•"AUDIO ~ " disappears, press the AUDIO ASSIGN button again.
5. Select the desired of the digital inputs connected while displaying "AUDIO ~ ".
•Each time the MULTI CONTROL knob is rotated or the CURSOR LEFT(◀)/RIGHT(▶) buttons are pressed, the corresponding input is selected as follows :
■Notes:
•When the selected digital input is not connected, the "DIG." indicator flickers and no sound will be heard.
•The selected digital input is automatically assigned to the corresponding input source on the INPUT SETUP menu. (For details, refer to "SETTING THE INPUT SETUP" on page 56.)
•The sound from the component connected to the selected digital input can be heard regardless of the selected input source.
6. Operate the selected component for playback.
•When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 36.
7. Adjust the (overall) volume.
Muting the sound
•"MUTE" flickers.
•To resume the previous sound level, press it again.
32
