Sherwood R-872 manual When selecting the SPEAKER CONFIGURATION, Continued, English

Continued

When selecting the SPEAKER CONFIGURATION

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the SPEAKER CONFIGURATION, then press the ENTER button.

ENGLISH

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired.

YES/NO: Select the desired depending on whether the speakers are connected or not.

2CH/1CH: Select the desired depending on the number of speakers connected to SURROUND BACK/ MULTI channels.

■Notes :

•When speakers are not set to "NO", you should set their distances from listening position and crossover frequencies according to their frequency characteristics. (For details, refer to "When selecting the SPEAKER DISTANCE" on page 64 and "When selecting the SPEAKER CROSSOVER" on page 65.)

•When the "SURROUND" is set to "NO", "BACK/MULTI" cannot be set to "2CH" or "1CH".

•When the surround back channels' power amplifier is assigned to "BI-AMP" or "ROOM 2", the "BACK/MULTI" cannot be selected. (For details, refer to "When selecting the AMP ASSIGN" on page 52.)

4. Repeat the above steps 2 and 3 until the speakers are all set as desired.

63