Sherwood R-872 manual Setting The System Setup, When selecting the AMP ASSIGN, English

ENGLISH

SETTING THE SYSTEM SETUP

• AMP ASSIGN : To assign the surround back channels' power amplifier correctly depending on how to use the speakers.

• SUBWOOFER MODE : To select the desired subwoofer mode.

• HDMI AUDIO OUT : To output the digital audio signals from the HDMI MONITOR OUT connector.

• TONE CONTROL : To adjust the tone (bass and treble) as desired.

•CINEMA EQ : To select the desired cinema EQ mode.

•MOMENTARY OSD : To turn on or off the OSD that shows the status corresponding to each operation momentarily.

•OSD POSITION ADJUST : To adjust the position of the momentary OSD and the OSD menu.

When selecting the items other than OSD POSITION ADJUST

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.

2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.

When selecting the AMP ASSIGN

•The surround back channels' power amplifier can drive the surround back speakers, the ROOM 2 speakers or the front bi-amp capable speakers. Depending on how to use the speakers, you should assign the power amplifier correctly. (For details, refer to "CONNECTING SPEAKERS" on page 11 and "CONNECTING ROOM 2 OUTS" on page 13.)

BACK ← → ROOM 2 : When connecting this receiver to the surround back speakers and the ROOM 2 speakers both, the power amplifier automatically drives the surround back speakers or the ROOM 2 speakers depending on whether the ROOM 2 function is turned off or on.

BI - AMP : To drive the front bi-amp capable speakers when connecting the FRONT and the SURROUND BACK/MULTI channels to them.

SURR BACK : To drive the surround back speakers when connecting the

SURROUND BACK/MULTI channels to them.

ROOM 2 : To drive the ROOM 2 speakers when connecting the ROOM 2 channels to

them. (" " lights up.)

52