Sherwood R-872 manual When selecting the DOLBY VIRTUAL SPEAKER, English

Models: R-872

1 84
Download 84 pages 48.51 Kb
Page 72
Image 72
When selecting the DOLBY VIRTUAL SPEAKER

ENGLISH

When selecting the DOLBY VIRTUAL SPEAKER

You can select the speaker layout to be used actually for each Dolby Virtual Speaker mode.

Note:

The speaker layout settings are valid only when listening in a Dolby Virtual Speaker mode.

1. Press the CURSOR UP()/DOWN() buttons to select the DOLBY VIRTUAL SPEAKER, then press the ENTER button.

2. Press the CURSOR UP()/DOWN() buttons to select the desired Dolby Virtual Speaker mode.

3. Press the CURSOR LEFT()/RIGHT() buttons to select the desired speaker layout.

When selecting the Dolby Virtual Speaker Reference mode

2 SPK : When using 2 front speakers only.

3 SPK : When using 2 front and center speakers.

When selecting the Dolby Virtual Speaker Wide mode

2 SPK : When using 2 front speakers only.

3 SPK : When using 2 front and center speakers.

4 SPK : When using 2 front and 2 surround speakers.

5 SPK : When using 2 front, center and 2 surround speakers.

Note:

• When the speakers are set to "NO", the corresponding speaker layouts cannot be selected.

4. Repeat the above steps 2 and 3 to select the desired speaker layout for another Dolby Virtual Speaker mode.

72

Page 72
Image 72
Sherwood R-872 manual When selecting the DOLBY VIRTUAL SPEAKER, English, SPK When using 2 front speakers only