Clover Electronics CDR0430, CDR0410 Camera Connection, Video Output Connection / VGA Connection

Page 17

Contents

4-4-1. Camera Connection

Connect the cameras to the Video Input (BNC Connector) on the back of the unit as shown.

On this unit, the user can connect up to 4 Cameras.

4-4-2. Video Output Connection / VGA Connection

Connect the composite monitor to any one of the BNC ports.

This unit can support up to two composite monitors at the same time. The video output to the two monitors will be the same.

Connect the VGA Monitor’s connector to the “DSUB 15 Pin Connector” on the rear of the unit.

The Video Output from the VGA port has the same content as the output from the BNC port, but the quality of the video stream will be better.

4-4-3. Audio Connection

Connect the speaker and audio input line to this port.

This unit can only support one audio input.

- 16 -

Image 17

Contents Digital Video Recorder Contents Setup Screen Setup Viewer About this manual DVR About This Unit Features Ntsc PAL What to do before Installation Installation Check List ™ Front Controls and Connectors on the DVRLED ™ Rear System Connection Audio Connection Camera ConnectionVideo Output Connection / VGA Connection Network Cable Connection Not Available on CDR0410 Alarm Output ConnectionMouse Connection Sensor Connection™ You are good to go!!! Check 4-4. System Connection Step By Step InstallationGeneral Operation PAN/TILT Remote ControllerContents Wheel Left button Right button PS/2 Connection PS/2 Mouse OptionRunning for the First Time Contents Quad Split Screen Display Display ScreensFull Screen Display Auto Sequence Icon PAN / Tilt & Zoom How to use Zoom / Focus How to use PAN / TiltOSD on / OFF Automatic Recording RecordingManual Recording Set Playback Time PlaybackContents Contents Search by Event There is another button with the Stop function How to Search Through PlaybackCopying to USB Contents Contents Setup Menu SetupCamera Setup Channel Display Contents Camera Color Option Record Setup Record Speed Contents Record Quality Hold Time Schedule Recording Contents Sensor Relay Output Sensor Setup Contents Motion Detection Channel Selection Sensitivity Selection Cell will be further explained in -5-4. Motion Area SetupRelay Output Setup Motion Area Setup Area Setup using Direction Keys Area Setup using the Mouse Screen Setup Sequence Setup Border SetupVideo Adjustment Audio Record Setup Audio SetupInput / Output Volume Setup Mute SetupHard Disk Setup System SetupFormat HDD Overwrite OptionContents Hard Disk Drive Information Password Change Contents Contents Known Errors Time Set Time Zone SetupTime Setup Event List Please Refer to -7-2. Search by Event Daylight Saving OptionNetwork Option Not Available on CDR0410 Network Enable OptionLocal IP Setup PC Viewer Contents Port Setup Network Password MAC Address SetupDdns Server Setup Network Video QualityPlease refer to the camera specs for detailed information RS-485 SetupModel Option PAN / Tilt Device SetupChannel / ID Setup Firmware Update Contents Exit SearchLanguage Viewer Installing / Running the Viewer Player Menu Icons Sound will not play if the speed is other than How to Open a Video fileHow to Save as AVI file Contents Contents Network Viewer Not Available on CDR0410 How to Connect to the DVR100 Refer to -8-5-2. Local IP Setup / Port Setup 102 103 Limited 2 Year Warranty