Contents
6-5-2. Sensitivity Selection
From this option the user can select the Sensitivity level from 1 ~ 4.
The Red Square behind the menu area is a virtual simulation of how much motion must be present for the DVR to sense through motion detecting.
ÚTo see the Red square, there must be movement at the camera and the Sensitivity must not be set to OFF while in Motion Detection Setup.
The Sensitivity of motion is determined by the motion within a certain number of cells. For example, if the Sensitivity is set to 1, then the Motion Detector will trigger if the DVR senses motion in one cell.
ÚThe cell will be further explained in Chapter 6-5-4. Motion Area Setup.
- 59 -