Chapter 2 Playing Along with Rhythms

Storing Settings (Setup)

You can save favorite combinations of Tone settings, settings for dual and split play, Session Partner settings, and the like as a “Setup.”

Once saved in this way, you can instantaneously switch the instrument to the desired group of settings simply by calling up the Setup.

You can store up to 6 different Programs.

The recommended settings were stored in the instrument when it shipped from the factory.

fig.02-15

The Setup contains stored

and unstored settings.

Refer to “Settings Stored in

the Setup” (p. 68).

1

1. Hold down the [Transpose] button and the [Split] button,

and press the ether Tone button.

The pressed Tone button and the display flash, and the current settings are

stored.

Selecting Stored Settings

1.Press the [Transpose] button and the [Split] button, getting

these indicator to light.

The Tone button’s indicator flashes in green.

2. Press the Tone button to which the settings you want to call

up have been stored.

Only the indicator on the selected button flashes in green.

33

Page 33
Image 33
Roland FP-2 owner manual Storing Settings Setup, Selecting Stored Settings