Roland FP-2 owner manual Turning the Power On and Off, Adjusting the Sound’s Volume and Brilliance

Before You Play

Turning the Power On and Off

*Once the connections have been completed (p. 8), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

■Turning On the Power

1.Before you switch on the power, turn the volume

down all the way by rotating the [Volume] knob.

fig.00-05

Adjusting the Sound’s Volume and Brilliance

fig.00-08

1.Use the [Volume] knob to adjust the overall volume level.

Rotating the knob clockwise increases the volume; counterclockwise rotation decreases it.

2.Press the [Power] switch on the back of the unit.

The power will turn on, and “FP2” appears in the display.

After a few seconds, the unit becomes operable and

playing the keyboard produces sound.

fig.00-06

Rear Panel

Lower Position

ON

*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

3.Adjust the volume to obtain the proper volume level.

■Turning Off the Power

1.Before switching the power off, turn the volume

all the way down by rotating the [Volume] knob.

fig.00-05

2.Press the [Power] switch on the back of the unit.

The power is switched off.

fig.00-07

Rear Panel

Upper Position

ON

Connecting Headphones

Connecting headphones allows you to enjoy playing anytime, even at night, without concern.

* Headphones are not included. Consult your Roland dealer if you want to purchase.

fig.00-09

1.Plug the headphones into the Phones jack at the rear of the piano.

Use the [Volume] knob on the FP-2 to adjust the volume of the headphones.

*Make sure to use stereo headphones.

*Make sure to use only Roland headphones. Headphones from other manufacturers may be unable to provide sufficient volume.

Some Notes on Using Headphones

•To prevent damage to the cord, handle the headphones only by the headset or the plug.

•The headphones may be damaged if the volume is too high when they are plugged in. Lower the volume on the FP-2 before plugging in the headphones.

•To prevent possible auditory damage, loss of hearing, or damage to the headphones, the headphones should not be used at an excessively high volume. Use the headphones at a moderate volume level.

10