Clover Electronics CDR0430, CDR0410 PAN / Tilt Device Setup, Channel / ID Setup, Model Option

Contents

6-8-7. PAN / TILT Device Setup

This option is to setup the PAN / TILT Device of the camera that supports the PAN / TILT function.

To enter this option, select the PAN / TILT Device option from the System Menu. (Main menu Ö System Setup Ö PAN / TILT Device)

6-8-7-1. Channel / ID Setup

The Channel is the number of the Camera. For example, Channel 1 represents CH 1, the camera showing the top left screen.

Because all, if any, of the PAN / TILT wires are connected to 1 port, every PAN

/TILT camera must be given an ID number. Refer to your camera manual for detailed information.

6-8-7-2. Model Option

This DVR Unit can support Peclco D Protocol and MERIT LI-LIN Protocol.

ÚPlease refer to your camera specs for more information.

6-8-7-3. PAN / TILT Test

This option is to test whether the PAN / TILT works or not.

For more information on how to operate, refer to Chapter 5-5-4. PAN / TILT & ZOOM.

- 86 -