note: For Passive Mode to be effective, the Failsafe® Starter Kill relay must be installed.
➜
unlocking/disarming
Pressing 
for one second disarms the system and unlocks the doors (if connected). The horn will honk twice (if connected and in audible mode) and the parking lights will flash twice to confirm disarming of the system. The optional Failsafe® Starter Kill will be deactivated. The status LED will turn off, unless the system is pro- grammed for Passive Mode. In Passive Mode, the status LED will flash rapidly when the system is disarmed. This indicates that the system will
note: If the system has been armed with the remote trans- mitter, you must use the transmitter or the Valet switch to disarm the system and deactivate the starter kill. Manually unlocking the vehicle does not disarm the sys- tem; it will only unlock the doors.
➜
disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can manually override the system. To do this, you must have the vehicle's igni- tion key and know where the Valet® switch is located. Be sure to check with the installer for the location of the Valet® switch.
© 2 0 0 6 d i r e c t e d e l e c t r o n i c s , i n c . | 7 |