To disarm the security system, turn the ignition to the ON posi- tion. Press and release the Valet switch within 10 seconds. The
the vehicle should start. If the vehicle does not start, you may have waited too long; turn the ignition off and repeat the process.
Location of Valet Button_________________________________
➜
audible mode
To temporarily turn on the arm or disarm horn honk(s), simply
press 
for less than one second before arming or disarming, and the confirmation honk(s) will be present for that one opera- tion only.
➜
valet mode
You can prevent your system from automatically activating the Failsafe® Starter Kill (optional, not included) and locking the doors by using Valet® Mode. This is very useful when washing the vehicle or having it serviced. In Valet® Mode, the starter kill cannot be activated, even with the transmitter, but all conve- nience functions (door locks, trunk release, etc.) will continue to work normally.
To enter or exit Valet® Mode:
8 | © 2 0 0 6 d i r e c t e d e l e c t r o n i c s , i n c . |