Video Recording ManagerUser interface en 37
Entry in the Type list | Available configuration settings |
|
|
| Name |
| Displays the display name of the profile if ONVIF Media |
| Profile is selected. If multiple names are available, |
| <multiple> is displayed. |
|
|
RTSP | Select for adding a 3rd party camera that supports the |
| Real Time Streaming Protocol. |
|
|
JPEG | Select for adding a 3rd party camera that can send JPEG |
| images (usually every CCTV camera). |
|
|
| In the Rate [ips] list, select the desired value. |
|
|
Table 12.1: Protocol settings |
|
VSG Camera Name
Change the camera name if required. This name is used for VRM and for Bosch Video Client.
See also
–Adding a Bosch camera to a VSG, 19
–Adding an ONVIF camera to a VSG, 20
–Adding a 3rd party camera to a VSG, 20
12.18Recording profiles tab (Video Streaming Gateway)
Main window > Devices tab > Expand 
> Expand 
Devices > 
Video Streaming Gateway device > Recording tab > Recording Profiles tab
Allows you to switch recording on or off for each VSG camera.
Recording
In the list, select the desired entry.
See also
– Switching on recording, 21
12.19Multicast tabs (Video Streaming Gateway)
Main window > Devices tab > 
Video Streaming Gateway device > Network tab
Allows you to configure multicast for the assigned cameras.
Enable
Click to enable multicast for this camera.
Multicast Address
Insert a valid multicast address (in the range 224.0.0.0 - 239.255.255.255).
Type in 1.0.0.0. A unique multicast address is automatically inserted based on the MAC address of the device.
Port
When a firewall is used, enter a port value that is configured as
Bosch Sicherheitssysteme GmbH | Software Manual | 2012.05 v1 DOC |