Bose RC-18S manual Some simple rules to keep it all straight, How to make it happen

Page 12

Svenska Nederlands Italiano Français Español Deutsch Dansk English

Code Switch Setting

You can assign a Bose® link compatible device to rooms B through N. Room O is reserved for non-Bose amplifiers and legacy (older) Bose powered speakers.

For connecting an SA-1 amplifier, see the instructions on page 13.

How to make it happen

First decide which rooms you want to group to receive the same audio stream. Then adjust the room and stream set- tings, using the small switches inside the RC-18S remote control battery compartment.

For details, refer to “How to change the settings, as needed” on page 15.

Code Switch Setting

Some simple rules to keep it all straight

Whether you use just one or many RC-18S remotes, keep these guidelines in mind.

•Remote controls for other-room use must be set with:

•the same house code as the primary remote.

•a different room code from the primary remote.

•a different room code from every other RC-18S remote, with one exception. If you want to use the RC-18S in the same room with the primary remote, it must be set for use in Room A, the same as the primary remote.

•If the RC-18S remote will be used with Bose® link com- patible products, such as:

•with a Bose® LIFESTYLE® SA-2 or SA-3 amplifier and passive speakers, the amplifier and remote must be set to the same room code.

•with a Bose 3•2•1 Series II or 3•2•1 GS Series II system, the remote and system must be set to the same room code.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Bose Lifestyle RC-18S Remote Control Where to use this expansion remote IntroductionThank you forIn tr d uctionchoosing the RC-18S remote How it differs from your primary remoteContents Deciding Where and How Setting up yourDeciding Where and Howexpansion productsTo get an additional room of sound With a Bose SA-2 or SA-3 amplifier and speakersWith a Series II 321 or 321 GS system To add more rooms of sound With older Bose products for expansionTo install batteries Preparing the RemoteGetting the remoteP epa ing the R oteready to use What each button does System ON, OFF, silencedSelect the source Select a play mode Select an audio program Confirm and return Using the remoteA udio Possibilitiesto control other audio Audio PossibilitiesTwo streams, two choices for you Main room requirementsCode Switch Setting Audio Stream 1 Listening AreaHow to make it happen Some simple rules to keep it all straightAdditional legacy product rules Make sure the house code settings match How to change the settings, as needed First check the house code setting switchesTo set your RC-18S remote for other room use switches To receive the same audio stream as the main roomNow for the rewards Keep the room codes consistentTroubleshootingReference Problem What to doReference Remote control range 65 ft 20 m Battery typeTechnical information Log for remote switch settings and products
Top Page Image Contents