Bose RC-18S manual Setting up yourDeciding Where and Howexpansion products

Page 4

Svenska Nederlands Italiano Français Español Deutsch Dansk English

Deciding Where and How

Setting up yourDeciding Where and Howexpansion products

If you have purchased other Bose® link compatible products, you can pair them to work seamlessly with your new remote. This allows you to command sound from your LIFESTYLE® system in an entirely different part of your home.

To get an additional room of sound

It takes only a few steps to set up one additional room of sound with Bose products. With batteries installed in the RC-18S remote, you can then use it for control in the same area with those products.

With a Bose SA-2 or SA-3 amplifier and speakers:

1.Arrange and connect the speakers and amplifier as instructed in the amplifier owner’s guide. (A Bose® link A cable is supplied with the amplifier only.)

2.Check the room setting on the amplifier, as instructed in the owner’s guide that came with it. This setting must be different from the main room remote.

3.Check the switch settings inside the battery compart- ment of the RC-18S remote. These include:

•House code (switches 1-4): Must match the main room remote control house code setting.

•Audio stream (switch 5): May be set like that of the main room remote or be set to receive a different audio stream instead. Set switch 5 in the RC-18S accordingly.

•Room setting (switches 6-9): These must be differ- ent from the main room remote and identical to the room settings in the amplifier.

Note: Your RC-18S remote and the SA-2 or SA-3 amplifier switches are set at the factory with identical house codes, with switch 5 set to command audio stream 2, and with room switches set for use in Room B.

4.If your amplifier and remote switches do not match, refer to “How to change the settings, as needed” on page 15.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Bose Lifestyle RC-18S Remote Control Where to use this expansion remote IntroductionThank you forIn tr d uctionchoosing the RC-18S remote How it differs from your primary remoteContents Deciding Where and How Setting up yourDeciding Where and Howexpansion productsTo get an additional room of sound With a Bose SA-2 or SA-3 amplifier and speakersWith a Series II 321 or 321 GS system To add more rooms of sound With older Bose products for expansionPreparing the Remote To install batteriesGetting the remoteP epa ing the R oteready to use System ON, OFF, silenced What each button doesSelect the source Select an audio program Select a play modeConfirm and return Using the remoteA udio Possibilitiesto control other audio Audio PossibilitiesTwo streams, two choices for you Main room requirementsCode Switch Setting Audio Stream 1 Listening AreaHow to make it happen Some simple rules to keep it all straightAdditional legacy product rules Make sure the house code settings match How to change the settings, as needed First check the house code setting switchesTo set your RC-18S remote for other room use switches To receive the same audio stream as the main roomNow for the rewards Keep the room codes consistentProblem What to do TroubleshootingReferenceReference Battery type Remote control range 65 ft 20 mTechnical information Log for remote switch settings and products
Top Page Image Contents