Bose RC-18S manual Make sure the house code settings match

Page 14

Code Switch Setting

Español Deutsch Dansk English

Figure 3

Nine switches inside the battery compartment

Make sure the house code settings match

For all of your secondary remote controls to work, the house code in each must match the one in your primary remote.

The first four switches define the house code and estab- lish which media center the remote can control.

House code switches

1 2 3 4 5 6 7 8 9

Svenska Nederlands Italiano Français

1 2 3 4 5 6 7 8 9

At the factory, all RC-18S remotes are set with the same house code as your LIFESTYLE® system. Usually, you do not need to change these first four switches.

However, in the case of a house code conflict with another nearby LIFESTYLE® system, you can change the house code in the primary remote to resolve the conflict. If you ever use this option, the changed house code must be applied to any expansion remote

controls used with this system, too.

At the factory, each RC-18S remote has its remaining switches set:

To receive audio stream 2 (switch 5)

To be used in Room B (switches 6-9)

To check the settings in your new remote, remove the battery cover to see the small switches just above the batteries.

14

Image 14
Contents Bose Lifestyle RC-18S Remote Control Thank you forIn tr d uctionchoosing the RC-18S remote Where to use this expansion remoteIntroduction How it differs from your primary remoteContents To get an additional room of sound Deciding Where and HowSetting up yourDeciding Where and Howexpansion products With a Bose SA-2 or SA-3 amplifier and speakersWith a Series II 321 or 321 GS system To add more rooms of sound With older Bose products for expansionGetting the remoteP epa ing the R oteready to use To install batteriesPreparing the Remote Select the source What each button doesSystem ON, OFF, silenced Confirm and return Select a play modeSelect an audio program Two streams, two choices for you Using the remoteA udio Possibilitiesto control other audioAudio Possibilities Main room requirementsCode Switch Setting Audio Stream 1 Listening AreaHow to make it happen Some simple rules to keep it all straightAdditional legacy product rules Make sure the house code settings match To set your RC-18S remote for other room use switches How to change the settings, as neededFirst check the house code setting switches To receive the same audio stream as the main roomNow for the rewards Keep the room codes consistentReference TroubleshootingReferenceProblem What to do Technical information Remote control range 65 ft 20 mBattery type Log for remote switch settings and products