One for All URC 9800 manual Setting UP Additional Home Entertainment Components

24

SETTING UP ADDITIONAL HOME

ENTERTAINMENT COMPONENTS

Besides the device keys that are already labeled (TV, VCR, CBL, etc.), the Home Producer can also operate the following components: Cassette Decks, Home Automation, Digital Audio Tape, Turntables, Video Accessories, and Miscellaneous Audio Components (e.g., Graphic Equalizers and Digital Music Service Boxes).

The Set Up codes for these devices can be accessed under the following device keys:

Cassette Decks:	Use the AUX1 Key
Home Automation:	Use the CD Key
Digital Audio Tape:	Use the AUX1 Key
Turntables:	Use the CD Key
Video Accessories:	Use the CBL/SAT Key

(Note: Web TV found under Video Accessories)

Miscellaneous Audio: Use the AMP Key

NOTE: Each device key (e.g., TV, VCR, CBL/SAT, etc.) can only operate one component at a time. If you have already set up a component on a key, then assigning a second component on the same key will erase the code for the first component you set up. For example, if you set up a DVD Player on DVD and then set up a Turntable on DVD, the Home Producer will only operate the Turntable.

For example, to set up a Cassette Deck on the AUX1 key:

NOTE: If the four-digit code for your device begins with a “0”, only the last three numbers of your code will be displayed.

1	Turn on your Cassette Deck.
2	Press and release the AUX1 key.
3	Press and hold SETUP until the
	display screen changes from
	[TAPE and the TIME] to [TIME SEQ].
4	Press the MENU – key one time.
	The display screen will change to
	[CODE SETUP]. Press SELECT.
	The display will change to
	[DEV SET UP].
5	Press SELECT and the display
	screen will change to [TAPE].

	25
6	Press MENU – to toggle between
	[TAPE] and [DAT]. Once [TAPE] is
	on the display screen, enter the first
	Cassette Deck code listed for your
	brand in the “Set Up Codes for
	Cassette Decks” on the next page,
	then press SELECT.
7	Point the remote control at the
	Cassette Deck and press POWER.
	Your Cassette Deck should turn
	OFF. Then press the ESC key to
	return the display to [TAPE and the
	TIME]. If your Cassette Deck does
	not turn OFF, enter the next code in
	the code list then press SELECT
	followed by POWER again. Once
	the correct code is entered, press
	the ESC key to return the display to
	[TAPE and the TIME].

Re-assigning Device Keys

You can use the Home Producer to operate a sec- ond TV or a second VCR or any combination of eight devices. To do this, you must re-assign one of the device keys (i.e., TV, VCR, DVD, CBL/SAT, TUNER, AMP, CD, or AUX1) to operate your sec- ond device. For example, to re-assign one of the device keys to support your other components:

1	Press and hold SETUP until the
	display screen changes from
	[DVD/LDP and the TIME] to
	[TIMED SEQ].

2x 2 Press the MENU – key twice. The display screen will change to [CONFIGURE]. Press SELECT. The display will change to [THEATR SEL].

3x 3 Press the MENU – key three times. The display screen will change to [MODE MAP]. Press SELECT. The display will change to [SOURCE].