One for All URC 9800 manual VCR Functions, PIP key accesses your VCR’s Picture-in-Picture feature

54

KEY INDEX (cont.)

VCR Functions

The VCR transport keys (i.e., PLAY, REW, FF, STOP, PAU and REC) access the features of your VCR. As a safety feature on the Home Producer, you must press the REC key twice.

NOTE: The SHIFT key accesses advanced features that are

mapped under the VCR keys: SHIFT + PLAY = SLOW, SHIFT + REW = SLOW –, SHIFT + FF = SLOW +, SHIFT + STOP = EJECT and SHIFT + PAUSE = X2.

0 - 9	The Digit keys (0-9) control direct
	channel access the same as the
	Digit keys on your original remote.

NOTE: If your original remote control required you to use an Enter key to change channels, use the ENTER key on the Home Producer after entering your channel number.

The ENTER key operates the same as the Enter key on your original VCR remote control.

The TV/SAT key operates the same as the TV/VCR key on your original VCR remote control.

The PREV CH (Previous Channel) key operates the same as the LAST CHANNEL or RECALL key on your original VCR remote control.

+The DISPLAY key (SHIFT + PREV CH) operates the display on your VCR.

The PIP key accesses your VCR’s Picture-in-Picture feature.

+The FREEZE key (SHIFT + PIP) freezes your Picture-In-Picture window.

The SWAP key swaps the Picture-in- Picture window and the main picture.

55

The MOVE PIP key moves the Picture-in-Picture window around your TV screen.

The MENU key operates the same as the MENU or OSD (On Screen Display) key on your original re mote. Use the MENU + (Up),

MENU – (Down), (Left) and (Right) to navigate through your menus. If your original remote con- trol had a Select/Enter key for use in your menu, use SELECT or ENTER.

+The PROG key (SHIFT + MENU) operates your secondary menus.

Use the MENU + (Up), MENU –

(Down), (Left) and (Right) to navigate through your menus. If your original remote control had a Select/Enter key for use in your menu, use SELECT or ENTER.

The SELECT key is used to make selections in the LCD Screen menu. It is also used to make selections in your on-screen VCR menus.

+The CLEAR key (SHIFT + SELECT) is used to exit or cancel selections in your on-screen VCR menus.

The MENU + (Up), MENU – (Down),

(Left) and (Right) are used to navigate through your on-screen menus. MENU + and MENU – are also used to navigate through the LCD Screen menu.

The CENTER and REAR (SHIFT +

CENTER) keys function the same

+as the ADD and DELETE keys on your original VCR remote control.