Premium Home Creations H.264 user manual Rear Panel Connectors

Page 10

DVR User’s Manual

Connecting Short-term Device

If any short-term devices shall be installed to the DVR as parts of the unit

system, such as USB ThumbDrive® or any USB devices, etc., make sure those devices are connected only after the unit is powered on. The reason is because the DVR can recognize the external devices only after the power-on process is done completely.

2.4Rear Panel Connectors

There are various connectors on the rear panel for the DVR installations. The connectors are described as the followings.

Main Monitor (S-Video / BNC)

Both S-Video and BNC output connectors are offered for connection to a main monitor. The main monitor displays live image and playback recorded video in full-screen or split-window format.

Call Monitor (BNC)

The call monitor is used to display full screen video of all installed cameras in sequence. The BNC call monitor connector allows user to connect the DVR with a call monitor.

VGA Output

VGA +

Dual VGA Digital Output

VGA output connectors are offered for connecting to VGA main monitors. Some models provide one while other models provide two VGA connectors.

Digital Output

A digital output connector is provided for connection to a displaying device that transfers data digitally to show the best video quality.

NOTE: Refer to Appendix E: Simultaneous Output Options for

detailed information about monitor functionality.

Video Input

A group of BNC connectors is offered for video input streams from installed cameras. The number of connectors is equal to the number of channels.

Video Out

Plenty of BNC connectors are positioned on the rear panel for looping out the video input.

RS-232C

The unit provides a RS-232C communication port for sending and receiving signals.

9

Image 10
Contents User’s Manual DVR User’s Manual DVR User’s Manual Important Information Rack MountingTable of Contents 1.3 DVR User’s Manual Overview Position the Unit System SetupConnecting Required Devices Select Video FormatRear Panel Connectors Power Switch Alarm I/O & RS485USB Connector Power JackFront Panel Introduction General System SetupPower LED LED DefinitionAlarm LED Functional KeysSEQ Sequence Direction KeysJOG/ Shuttle for specified models Please refer to Appendix F Jog / ShuttleEnter OSD Setup Menu Authority Setup Password ProtectionAccount Setup Load Default SettingPower Off Power On / Shutdown the UnitTo Power On the Unit RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Network Time Protocol Setup Time Zone Network Time Protocol SetupIP Camera Title IP Camera SettingIP Camera Information Hostname/IPConnection Setup Status Device SetupActivated IP Dome ProtocolRecord Schedule / Quality Setting Schedule SetupPreset Record Configuration Per Camera ConfigurationEzRecord Setup Record Event Video OnlyPre-Alarm Recording Data LifetimePurge Data Circular RecordingAudio Recording Purge All DataText Overlay POS and Text SetupText Function Purge Event BeforeTrigger Exception Text SetupException No Exception StringInput Source Input SetupPort Selection Camera SelectionInput Process Manual Filter SetupText Filter Text Baud Rate, Bit, Stop, ParityViewing Modes Basic OperationView Live / Playback Video Viewing in Full ScreenView Recorded Video Digital ZoomView Live Cameras Freeze Live ImageFreeze Key Usage in PlaybackPause Playback and Single Step Forward PlaySequence with Call Monitor Sequence SetupSequence with Main Monitor 1st and 2nd For 16ch models onlySearch Recorded Video Search by TimeSearch by Event Search by Text By TextVideo Export Export from OSD Setup MenuSelect the External Device Select Video for Exporting Erase Disc Quick Video Export through Front PanelDigital Signature EzBurn IntroductionExport Normal Video Dome Connection Dome ControlExport Event Video Dome Protocol Setup 3 RS485 SetupDome Controlling Key Focus Far Set Preset PointsIris Close Zoom OutCall Preset Points Intercom Function UPnP FunctionEnable the UPnP function in the DVR Setting Up the DVR and the PCUPnP NAT Traversal Function Remote Monitoring Software Remote Monitoring System RequirementsSoftware Installation Change Internet SettingsDVR User’s Manual Install Remote Monitoring Software Log in / Log off Basic Operation for Monitoring Remotely Software UpgradesView Live Video Select Display Mode Operate Cameras with Dome ControlRecord Video Instantly Instant RecordingPlayback Instant Recorded Video Playback Video Playback Remote VideoIcon Name Description Playback Local *.drv FilesPlayback Controls Play / PauseSearch from Event List Verify Digital SignatureTake a Snapshot Remote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs Appendix B Remote Controller DVR Control mode Dome Camera Control mode232 233 234 235 236 237 238 239 Appendix C USB Mouse Operation SEQAppendix D Keyboard Access Sketch For VGA + digital output models VGA + Digital Output Appendix E Simultaneous Output OptionsDual VGA Appendix F Jog / Shuttle Control