Premium Home Creations H.264 user manual Digital Zoom, View Live Cameras, View Recorded Video

Page 35

DVR User’s Manual

4.1.2Digital Zoom

Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps.

Press any CHANNEL key to view the corresponding camera in full screen.

Press ENTER to view 2× zoomed screen of the selected camera.

To view a specific area in 2× zoomed screen, use Direction keys to pan / tilt the zoomed screen.

Either press ENTER again or press ESC to leave the Zoom mode.

4.1.3View Live Cameras

Users are allowed to view live camera in versatile viewing modes, including full-screen, 2×2, 3×3 and 4×4. The general operation under live mode is described as follows.

Freeze Live Image

Press FREEZE while viewing live image, the image pauses but the date / time information does not, and the system clock continues running.

Press FREEZE to pause the live image; press FREEZE again to resume the live camera view.

4.1.4View Recorded Video

To view recorded video, user can press PLAY key directly. After pressing the PLAY key, the unit starts to continue playing back the recorded video from the suspended point of record. If it is the first time to use the PLAY key, the unit will playback from the very beginning of the record. Alternatively, user can select records from the Search menu to play specific video. Refer to section Search Recorded Video for further information.

The Forward or Reverse speed indicator will be shown on the bottom-left of the screen, when in the playback mode.

The general operations in playback mode are described as follows.

34

Image 35
Contents User’s Manual DVR User’s Manual DVR User’s Manual Rack Mounting Important InformationTable of Contents 1.3 DVR User’s Manual Overview Select Video Format System SetupConnecting Required Devices Position the UnitRear Panel Connectors Power Jack Alarm I/O & RS485USB Connector Power SwitchLED Definition General System SetupPower LED Front Panel IntroductionFunctional Keys Alarm LEDDirection Keys SEQ SequencePlease refer to Appendix F Jog / Shuttle JOG/ Shuttle for specified modelsEnter OSD Setup Menu Load Default Setting Password ProtectionAccount Setup Authority SetupReboot Power On / Shutdown the UnitTo Power On the Unit Power OffDate / Time Display System Date / Time SettingSet Date / Time Set Date / TimeDaylight Saving Time Time Zone Network Time Protocol Setup Network Time Protocol SetupHostname/IP IP Camera SettingIP Camera Information IP Camera TitleConnection Setup IP Dome Protocol Device SetupActivated StatusSchedule Setup Record Schedule / Quality SettingPer Camera Configuration Preset Record ConfigurationRecord Event Video Only EzRecord SetupData Lifetime Pre-Alarm RecordingPurge All Data Circular RecordingAudio Recording Purge DataPurge Event Before POS and Text SetupText Function Text OverlayException String Exception Text SetupException No TriggerCamera Selection Input SetupPort Selection Input SourceText Baud Rate, Bit, Stop, Parity Manual Filter SetupText Filter Input ProcessViewing in Full Screen Basic OperationView Live / Playback Video Viewing ModesFreeze Live Image Digital ZoomView Live Cameras View Recorded VideoPlay Key Usage in PlaybackPause Playback and Single Step Forward FreezeFor 16ch models only Sequence SetupSequence with Main Monitor 1st and 2nd Sequence with Call MonitorSearch by Time Search Recorded VideoSearch by Event By Text Search by TextSelect the External Device Export from OSD Setup MenuVideo Export Select Video for Exporting EzBurn Introduction Quick Video Export through Front PanelDigital Signature Erase DiscExport Normal Video Export Event Video Dome ControlDome Connection 3 RS485 Setup Dome Protocol SetupDome Controlling Key Zoom Out Set Preset PointsIris Close Focus FarCall Preset Points UPnP Function Intercom FunctionUPnP NAT Traversal Function Setting Up the DVR and the PCEnable the UPnP function in the DVR Remote Monitoring System Requirements Remote Monitoring SoftwareChange Internet Settings Software InstallationDVR User’s Manual Install Remote Monitoring Software Log in / Log off View Live Video Software UpgradesBasic Operation for Monitoring Remotely Operate Cameras with Dome Control Select Display ModePlayback Instant Recorded Video Instant RecordingRecord Video Instantly Playback Remote Video Playback VideoPlay / Pause Playback Local *.drv FilesPlayback Controls Icon Name DescriptionTake a Snapshot Verify Digital SignatureSearch from Event List Remote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs DVR Control mode Dome Camera Control mode Appendix B Remote Controller232 233 234 235 236 237 238 239 SEQ Appendix C USB Mouse OperationAppendix D Keyboard Access Sketch Dual VGA Appendix E Simultaneous Output OptionsFor VGA + digital output models VGA + Digital Output Appendix F Jog / Shuttle Control