Premium Home Creations H.264 Circular Recording, Audio Recording, Purge Data, Purge All Data

Page 29

DVR User’s Manual

3.6.8Circular Recording

Users can choose to record video in circular mode or in linear mode. If circular mode is selected, the DVR will stores new video into the HDD spaces while overwrite the oldest recorded video. Alternatively, if linear mode is selected, the DVR will stop recording when the HDD is full. In the meantime, the internal buzzer will start beeping and a message will be shown on the screen informing users that the disk is full.

From the Record Setup menu, move the cursor to <Circular Recording> and press ENTER, then select <ON> / <OFF> using UP / DOWN keys.

3.6.9Audio Recording

This item allows user to enable / disable Audio recording function of the unit. When it’s set to <ON>, audio input is recorded and saved with the video. When it’s set to <OFF>, audio is ignored.

3.6.10Purge Data

This item is used to delete the Normal or Event recording video. In Record Setup menu, move the cursor to <Purge Data> and press ENTER; the Purge Data menu is displayed.

 

 

Purge Data

1.

Purge All Data

No

2.

Purge All Event Data

No

3.

Purge Event Before

2008/01/01

4.

Start to Purge

No

Purge All Data

The item is used to delete all recorded video from the database. Set this item to <Yes using UP / DOWN keys, and start the deletion by setting <Start to Purge> to <Yes>.

Purge All Event Data

The item is used to delete all event video from database(s). Using UP / DOWN keys to select <Yes> and start the deletion by setting <Start to Purge> to <Yes>.

28

Image 29
Contents User’s Manual DVR User’s Manual DVR User’s Manual Rack Mounting Important InformationTable of Contents 1.3 DVR User’s Manual Overview Connecting Required Devices System SetupPosition the Unit Select Video FormatRear Panel Connectors USB Connector Alarm I/O & RS485Power Switch Power JackPower LED General System SetupFront Panel Introduction LED DefinitionFunctional Keys Alarm LEDDirection Keys SEQ SequencePlease refer to Appendix F Jog / Shuttle JOG/ Shuttle for specified modelsEnter OSD Setup Menu Account Setup Password ProtectionAuthority Setup Load Default SettingTo Power On the Unit Power On / Shutdown the UnitPower Off RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Time Zone Network Time Protocol Setup Network Time Protocol SetupIP Camera Information IP Camera SettingIP Camera Title Hostname/IPConnection Setup Activated Device SetupStatus IP Dome ProtocolSchedule Setup Record Schedule / Quality SettingPer Camera Configuration Preset Record ConfigurationRecord Event Video Only EzRecord SetupData Lifetime Pre-Alarm RecordingAudio Recording Circular RecordingPurge Data Purge All DataText Function POS and Text SetupText Overlay Purge Event BeforeException No Exception Text SetupTrigger Exception StringPort Selection Input SetupInput Source Camera SelectionText Filter Manual Filter SetupInput Process Text Baud Rate, Bit, Stop, ParityView Live / Playback Video Basic OperationViewing Modes Viewing in Full ScreenView Live Cameras Digital ZoomView Recorded Video Freeze Live ImagePause Playback and Single Step Forward Key Usage in PlaybackFreeze PlaySequence with Main Monitor 1st and 2nd Sequence SetupSequence with Call Monitor For 16ch models onlySearch by Time Search Recorded VideoSearch by Event By Text Search by TextSelect the External Device Export from OSD Setup MenuVideo Export Select Video for Exporting Digital Signature Quick Video Export through Front PanelErase Disc EzBurn IntroductionExport Normal Video Export Event Video Dome ControlDome Connection 3 RS485 Setup Dome Protocol SetupDome Controlling Key Iris Close Set Preset PointsFocus Far Zoom OutCall Preset Points UPnP Function Intercom FunctionUPnP NAT Traversal Function Setting Up the DVR and the PCEnable the UPnP function in the DVR Remote Monitoring System Requirements Remote Monitoring SoftwareChange Internet Settings Software InstallationDVR User’s Manual Install Remote Monitoring Software Log in / Log off View Live Video Software UpgradesBasic Operation for Monitoring Remotely Operate Cameras with Dome Control Select Display ModePlayback Instant Recorded Video Instant RecordingRecord Video Instantly Playback Remote Video Playback VideoPlayback Controls Playback Local *.drv FilesIcon Name Description Play / PauseTake a Snapshot Verify Digital SignatureSearch from Event List Remote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs DVR Control mode Dome Camera Control mode Appendix B Remote Controller232 233 234 235 236 237 238 239 SEQ Appendix C USB Mouse OperationAppendix D Keyboard Access Sketch Dual VGA Appendix E Simultaneous Output OptionsFor VGA + digital output models VGA + Digital Output Appendix F Jog / Shuttle Control