![](/images/new-backgrounds/1128409/128409121x1.webp)
APPENDIX | |
|
|
(8)Select a third HDD of [*] Ext. Press the “Apply ” button after selecting action as “Format ”. Then [*] is changed to [R].
(9)Select a fourth HDD of [*] Ext . Press the “Apply ” button after selecting action as “Format ”. Then [*] is changed to [R].
(10)Press the [EXIT] button to shut down “Disk Manager”.
When using RAID
The following description is when
(1)When external HDD RAID is connected to IEEE1394 port, “Disk Manager” runs automatically. If not, run it manually in “MenuàUtility àDisk Manager”.
(2)Select a first HDD of [F] Ext. Press the “Apply ” button after selecting action as “Add ”. Then [F] is changed to [*].
It is when ExtA is added as primary disk.
If connecting the device that is used in ELX16
(3)Select a second HDD of [F] Ext . Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].
(4)Select a first HDD of [*] Ext . Press the “Apply” button after selecting action as “Format ”. Then [*] is changed to [R].
(5)Select a second HDD of [*] Ext . Press the “Apply ” button after selecting action as “Format ”. Then [*] is changed to [R].
(6)Press the [EXIT] button to shut down “Disk Manager”.
Rugged CCTV | Error! Unknown document property name | 61 |
(v 1.0)