![](/images/new-backgrounds/1128409/12840953x1.webp)
INSTALLATION AND CONNECTION | |
|
|
9.1.3. Configuring Sensor at OSD menu
(1)Press the [Menu] button, and select the “Alarm Source ” among OSD menus.
(2)Select “Sensor” menu and press the [ Enter] button for moving to the sub- menu.
9.1.3.1.Global
It is for setting 16 sensors simultaneously. It has three types; Off / Normal Open (N.O.) / Normal Close (N.C.)
(1)Select “Global” and set a type.
(2)Press the “Apply ” button in order to confirm the setting value.
9.1.3.2.Configuration
It is for setting 16 sensors separately. Select and set each sensor.
(1)Select “Configuration” and press the [Enter] button.
(2)Select a sensor (S1 ~ S16) and set its type.
(3)Press the [Exit] button after setting.
Rugged CCTV | Error! Unknown document property name | 27 |
(v 1.0)