First Alert DVR0810, DVR0805 user manual Cctv Resolution, Region Cover, Motion Detect Setup

Page 19

BASIC OPERATION

RECORDING

CCTV Resolution

CCTV resolution is measured in vertical and horizontal pixel dimensions and typically limited by the capabilities of both the camera and the recorder that you are using for your CCTV surveillance installation. CCTV systems use an analog video signal. For television specifications (which CCTV uses) the highest resolution that can be captured and stored

is 704 x 480 (NTSC for the United States) and 720 x 576 (PAL for Europe). This resolution is known as D1 resolution. A high end CCTV recorder is capable of recording at up to D1 resolution.

Region Cover

REGION COVER lets you block a specific portion of a channel you do not want recorded or shown on the display screen. This can be useful if you need to conceal a sensitive area being captured by the camera. To use the REGION COVER:

1.From record menu click REGION COVER. The REGION COVER menu opens.

2.Choose a channel you wish to apply the Region Cover.

3.Select ON from the SWITCH drop-down menu.

4.Click SET in REGION COVER. The screen will be replaced by the full- screen camera view of the desired channel. Using the mouse, place the cursor just outside the region cover square. Click and drag the black square with your cursor to place and size the area you wish to conceal. Up to 4 separate cover areas are available to set.

5.Right-click anywhere on the screen to return to the Region Cover menu.

6.Click OK. Click OK in the RECORD window. Click EXIT.

Motion Detect Setup

You can configure motion detection for each channel (Camera) connected to the DVR. To configure motion detection:

1.From the Main Menu click ADVANCED. Then click Motion Detect.

2.Under STATUS, select ON to enable motion detection for the desired channel­. Click NEXT PAGE for additional channels.

3.Under SENSITIVITY, select from the LOWEST setting to the HIGHEST sensitive setting.

4.Under REGION, click SET. The red motion detect grid appears over the selected channel in full screen.

5.Click the blocks in the grid to enable/disable motion detection. Red=motion detection enabled; White=motion detection disabled.

6.Right-click anywhere on the screen to return to the Motion Detection menu.

7.The DELAY, setting will cause the recording to continue after motion stops for the number of seconds selected.

8.SHOW MESSAGE ON will display the alarm status when motion is detected. -See alarm status screen

9.SEND Email enables/disables sending an email alert if desired. Email must be configured.

10.BUZZER enable the DVR to sound or not sound if motion is detected. Click NEXT PAGE to set additional camera channels.

11.Click OK to save settings.

CCTV Resolutions D1: 704 x 480

HD1 (2CIF): 704 x 240

CIF: 352 x 240

QCIF: 176 x 120

Region Cover

Motion Detect Menu

Alarm Status

Motion Detect Grid

Page 19

Image 19
Contents USER’S Manual Thank YOU IntroductionWelcome Product features KEY Product FeaturesMain Description Table of Contents Introduction Fire and electric shock hazard statement SafetySafety Precautions FCC ComplianceProduct Overview Package ContentsFront Panel DVR ControlsBack Panel Directions for Installing/ Changing Batteries Remote ControlRemote Control Remote Control OperationMouse and Virtual Keypad Mounting Cameras and Running Cable Camera and Power ConnectionsInstalling Cameras Connecting DevicesQuick Access Menu Initial SetupPower On/Off User LoginMain Menu Main Menu AccessPassword Setup Setting Up Passwords & User PermissionsModify Password Add User Add Group Account Modify To Set PasswordTo Modify the Group or User Setting Up the Live View Video Screen Camera Display SetupNtsc or PAL? Language Setting Up Language/Date/TimeWhy Set a Date & Time? Language, Date and TimeRecording Record ModeBasic Operation RecordingMotion Detect Setup Cctv ResolutionRegion Cover Record Search Search ModePlayback PlaybackHDD menu displays the following Backup To backup recorded dataHDD Management Hard Drive and USB OptionsAlarm and Email Options AlarmAdvanced Setup AlarmVideo Blind Screen Alarm Status Alarm Manage Screen Alarm ManagementAlarm Inputs Alarm OuputSystem System Info and System UpdateSystem Information Pan tilt zoom...PTZ Pan/Tilt/Zoom PTZ SetupPTZ Camera Setup PTZAdvanced Operations PTZ SetupNetwork Setup Remote AccessNetwork Setup for Remote Access UPnP Universal Plug and Play To configure Static IP settings in the DVRTo configure UPnP settings To configure PPPoE settingsTo obtain your Primary or Secondary DNS Ddns Dynamic Domain Name ServiceWAN Settings Example First obtain your Router DNSPort Forwarding Next configure Ddns settings in the DVRHow to Determine the IP Address of the DVR Port Forwarding Naming TipRemote Surveillance Remote Surveillance using Internet Explorer 8 orRemote Surveillance Logging Into Your System Remotely Using Remote SurveillanceSetup Required Prior to Remote Access Configuring ActiveX Control in Internet ExplorerRemote Surveillance Main Screen Live Viewing Talk Function Recording Live Viewing TabRemote Viewing-Playback Screen Playback TabRemote Viewing-Progress Bar Search Remote BackupRemote Viewing-Error Message Remote Viewing-Search Calendar Player SoftwareRemote Setup PTZ Screen Remote Setup Network Screen Setup TabRemote Setup Record Screen Remote Setup Alarm ScreenRemote Setup Host Info Screen Remote Setup Setting Screen Remote Setup Maintenance ScreenMobile Phone Setup and ControlMobile Setup Mobile AccessMobile Setup Hard Drive Hard Drive Removal and InstallationHDD Installation To replace the hard drive in the DVR AppendixTechnical Specifications SpecificationsFAQ,s FAQ SQuestion What is the meaning of? Answer Question Why do I have a USB device error? Answer Question Why is there no audio when playing back? AnswerQuestion Why is my system time not correct? Answer Question Why doesn’t motion detection work? AnswerTroubleshooting TroubleshootingWarranty WarrantyBRK Brands, Inc Jarden Corporation Company Nysejah

DVR0810, DVR0805 specifications

The First Alert DVR0810 and DVR0805 are sophisticated digital video recorders designed for home security and surveillance. Both models provide a comprehensive solution for monitoring premises, providing peace of mind and enhanced security features.

One of the standout features of the DVR0810 and DVR0805 is their ability to support up to 8 cameras simultaneously. This scalability allows homeowners and businesses to cover multiple areas, ensuring a robust security system. Each channel can record continuously or be programmed for motion-activated recording. This flexibility is essential for conserving storage space and focusing on key events.

The devices come equipped with a user-friendly interface that simplifies the setup and operation of the DVR system. Users can configure settings easily, allowing for quick adjustments based on particular surveillance needs. The built-in Wi-Fi capability in the DVR0810 enables remote access from various devices. Users can monitor live feeds, playback recorded footage, and receive alerts directly on their smartphones or tablets through the accompanying mobile app.

Both models utilize H.264 video compression technology. This ensures high-quality video recordings without consuming excessive storage space, allowing for longer retention periods of footage. The DVR0810 and DVR0805 support hard drives with substantial storage capacities, making them ideal for users who require continuous monitoring.

In terms of video resolution, the DVRs deliver crisp and clear images, with options often up to 1080p. This high-definition capability facilitates better image recognition, ensuring that details such as faces and license plates can be captured effectively.

The systems also feature motion detection alerts, which notify users when motion is detected within the camera's field of view. This proactive feature enhances security by allowing prompt responses to potential threats.

Moreover, the DVR0810 and DVR0805 are designed with robust security protocols to protect recorded footage from unauthorized access. Password protection and encryption provide an additional layer of assurance, safeguarding sensitive information.

In conclusion, the First Alert DVR0810 and DVR0805 are powerful and versatile digital video recorders that cater to various surveillance needs. With features like multi-camera support, high-definition recording, and remote access capabilities, these models stand out as reliable solutions for enhancing security in homes and businesses.