First Alert DVR0805, DVR0810 user manual Safety Precautions, FCC Compliance, Disposal

Page 6

SAFETY

CAUTION STATEMENTS

Safety Precautions

Do not drop, puncture, or disassemble the cameras or DVR.

Do not tug on the power adapter. Use the plug to remove it from the wall.

Do not expose the cameras or DVR to high temperatures.

For your own safety, avoid using the DVR when there is a storm or lightning in your area.

Use the cameras and DVR with care. Avoid pressing hard on the cameras or DVR body.

Do not use power cable if it is damaged or crushed.

FCC Compliance

FCC Compliance Class B Digital Device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that of the receiver.

Consult the dealer or an experienced radio or TV technician for help.

Notice: Only peripherals complying with FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by First Alert / BRK Brands, Inc. is likely to result in interference to radio and TV reception. Changes or modifications to the product, not expressly approved by First Alert / BRK Brands, Inc., could void the user’s authority to operate the equipment.

Important: The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device. The phone number listed below is for FCC related questions only and not intended for questions regarding the connection or operation for this device.

FCC Declaration of Conformity for devices with the FCC logo. Responsible Party: First Alert / BRK Brands, Inc., 3901

Liberty Street Rd., Aurora, IL. 60504-8122. Telephone: (630) 851 - 7330. Product / Model: DVR0805 and DVR0810.

We, First Alert / BRK Brands, Inc. declare under our sole responsibility that the device to which this declaration relates: Complies with

Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Certification (if applicable)

This device contains a radio transmitter. Accordingly, it has been certified as compliant with 47 CFR Part 15 of the

FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with an FCC ID.

fire and electric shock hazard statement

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS WELL AS INJURY OR DEATH.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS DVR UNIT TO RAIN OR MOISTURE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT

Caution!

When working with electrostatic sensitive de- vices such as hard disk or DVR unit, make sure you use a static-free workstation. Any electro- static energy coming in contact with the hard

disk or DVR can damage it permanently.

Disposal

These symbols indicate that it is prohibited to dispose of these batteries in the household waste. Take spent batteries that can no longer be charged to the designated collection points in your community.

Page 6

Image 6
Contents USER’S Manual Introduction Thank YOUWelcome KEY Product Features Product features Main Description Table of Contents Introduction FCC Compliance SafetySafety Precautions Fire and electric shock hazard statementPackage Contents Product OverviewDVR Controls Front PanelBack Panel Remote Control Operation Remote ControlRemote Control Directions for Installing/ Changing BatteriesMouse and Virtual Keypad Connecting Devices Camera and Power ConnectionsInstalling Cameras Mounting Cameras and Running CableUser Login Initial SetupPower On/Off Quick Access MenuSetting Up Passwords & User Permissions Main Menu AccessPassword Setup Main MenuTo Set Password Modify Password Add User Add Group Account ModifyTo Modify the Group or User Camera Display Setup Setting Up the Live View Video ScreenNtsc or PAL? Language, Date and Time Setting Up Language/Date/TimeWhy Set a Date & Time? LanguageRecording Record ModeBasic Operation RecordingCctv Resolution Motion Detect SetupRegion Cover Playback Search ModePlayback Record SearchHard Drive and USB Options Backup To backup recorded dataHDD Management HDD menu displays the followingAlarm AlarmAdvanced Setup Alarm and Email OptionsAlarm Ouput Alarm ManagementAlarm Inputs Video Blind Screen Alarm Status Alarm Manage ScreenSystem Info and System Update SystemSystem Information PTZ Pan/Tilt/Zoom PTZ SetupPTZ Camera Setup Pan tilt zoom...PTZPTZ Setup Advanced OperationsRemote Access Network SetupNetwork Setup for Remote Access To configure PPPoE settings To configure Static IP settings in the DVRTo configure UPnP settings UPnP Universal Plug and PlayFirst obtain your Router DNS Ddns Dynamic Domain Name ServiceWAN Settings Example To obtain your Primary or Secondary DNSPort Forwarding Naming Tip Next configure Ddns settings in the DVRHow to Determine the IP Address of the DVR Port ForwardingRemote Surveillance using Internet Explorer 8 or Remote SurveillanceRemote Surveillance Configuring ActiveX Control in Internet Explorer Using Remote SurveillanceSetup Required Prior to Remote Access Logging Into Your System RemotelyRemote Surveillance Main Screen Live Viewing Tab Live Viewing Talk Function RecordingPlayback Tab Remote Viewing-Playback ScreenRemote Viewing-Progress Bar Player Software Remote BackupRemote Viewing-Error Message Remote Viewing-Search Calendar SearchRemote Setup Alarm Screen Setup TabRemote Setup Record Screen Remote Setup PTZ Screen Remote Setup Network ScreenRemote Setup Setting Screen Remote Setup Maintenance Screen Remote Setup Host Info ScreenMobile Access Setup and ControlMobile Setup Mobile PhoneMobile Setup Appendix Hard Drive Removal and InstallationHDD Installation To replace the hard drive in the DVR Hard DriveSpecifications Technical SpecificationsFAQ S FAQ,sQuestion What is the meaning of? Answer Question Why doesn’t motion detection work? Answer Question Why is there no audio when playing back? AnswerQuestion Why is my system time not correct? Answer Question Why do I have a USB device error? AnswerTroubleshooting TroubleshootingWarranty WarrantyBRK Brands, Inc Jarden Corporation Company Nysejah