Philips SDV7120/27 user manual Set up SDV7120, For VHF/FM reception, For UHF reception

Page 7

4 Set up SDV7120

For VHF/FM reception

1 To turn the amplifier up, switch the gain control towards the max level.

2 Extend the VHF rod antenna to the longest possible length.

3 Turn the TV or FM radio to the desired channel/station. Move the VHF rod antenna in different directions up and down until the reception is achieved.

Note

•• It is possible to switch the gain control level down for best reception.

Note

•• To check the distance from the local TV broadcast transmitters to your location, visit www.antennaweb. org for more information.

For UHF reception

1 Turn the TV to the desired channel/ station.

2 To turn the amplifier up, switch the gain control towards the max level.

3 Tilt or swivel the UHF log periodic antenna towards the transmitter until the reception is achieved.

EN 7

Image 7
Contents Register your product and get support at Page Contents Class B Clause SafetyRecycling Relocate the receiving antennaOverview Your SDV7120Turn the power switch on. »» The blue LED is lit InstallationGet started For VHF/FM reception Set up SDV7120For UHF reception Connect the antenna directly to the TV Set up a digital tuner with this antennaCoaxial Warranty and ServiceGlossary AmplifierVHF Very high frequency Female connectorMale connector UHF Ultra high frequencyPage PDCC-PENG-901