Connections
English
Step 5: Connecting the power cord
IMPORTANT!
– If your system is equipped with a |
Voltage Selector, set the VOLTAGE |
SELECTOR (located on the back of the |
left speaker) to match the local power |
line. |
Note:
–If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain mono).
– Never make or change any connection |
with the power switched on. |
After everything is connected properly, plug in the AC power cord to the power outlet.
Optional: Connecting additional equipment
A M
A E R I A L
F M
A E R I A L
C DIGITAL IN | VIDEO OUT |
VIDEOS - VIDEO
SUB WOOFER | DIGITAL |
OUT | OUT |
| R LINE OUT L | |
AUDIO | R I G H T | L E F T |
INPUT | + |
|
|
| |
| RSP- 134V | |
D | – |
|
SPEAKER 4 Ω | ||
VIDEO IN
AUDIO IN
L
B 
R 
IMPORTANT!
–Some discs are
cannot record the disc through a VCR or digital recording device.
–When making connections, make sure the colour of cables matches the colour of jacks.
–Always refer to the owner's manual of the other equipment for complete connection and usage details.
M I C R O T H E A T R E M C D 1 9 6 | |
SOURCE |
AUDIO OUT
L | DISPLAY/CLOCK SET |
|
|
| |
R | DBB | - VOLUME + |
|
|
DSC
A | iR |
| PRESET |
| AUX |
| TUNING |
Using the VCR for recording DVDs B
Connect one of the system's VIDEO OUT jacks to the corresponding VIDEO IN jack, and LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR.This will allow you to make analogue stereo (two channel, right and left) recordings.
Recording (digital) C
Connect the system's DIGITAL OUT jack to the DIGITAL IN jack on a digital recording device (such as
Before starting operation, set the DIGITAL OUT according to the audio connection. (See "DIGITAL OUT".)
Connecting an active subwoofer D
Connect the DVD micro system's SUBWOOFER OUT jack to the AUDIO INPUT jack on an active subwoofer (not supplied).
Listening to the playback of other equipment A
Use a cinch cable (not supplied) to connect AUX on the front panel of the DVD player to the analogue audio out terminals of an external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder).
Before starting operation, press SOURCE on the front panel to select AUX or press AUX on the remote in order to activate the input source.
16