Digital OUT, Brightness, Contrast, Hue, Saturation

VIDEO SETUP		DIGITAL OUT

The options included in VIDEO SETUP page are: "COMPONENT", "TV MODE", "BRIGHTNESS", "CONTRAST", "HUE" and "SATURATION".

BRIGHTNESS

Adjusts the brightness level. Range: 0-12.

Adjusts the contrast level. Range: 0-12.

Adjusts the hue level. Range: -6-+6.

Adjusts the saturation level. Range: 0-12.

The options included in AUDIO SETUP page are: "DIGITAL OUT", "DOWNMIX", "3D PROCESSING", "LPCM" and "NIGHT MODE".

➜DIGITAL/OFF:Turns off the digital output.

➜DIGITAL OUT: If you have connected your DIGITAL OUT to a multi-channel decoder/ receiver.

➜DIGITAL/PCM: Only if your receiver is not capable of decoding multi-channel audio.

This options allows you to set the stereo analogue output of your DVD Player.

➜LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

➜STEREO: Select this option when output

delivers sound from only the two front speakers.

➜VSS: Allows the DVD player to use virtual surround sound effects.

3D processing provides a virtual surround sound experience using just two speakers.

➜OFF, CONCERT, CHURCH, PASSIVE, WIDE and LIVE

If you connect the DVD Player to a PCM compatible receiver via the coaxial terminal, you may need to adjust 'LPCM'.

Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.

➜48K: Playback a disc recorded at the sampling rate of 48kHz.

➜96K: Playback a disc recorded at the sampling rate of 96kHz.

➜192K: Playback a disc recorded at the sampling rate of 192kHz.

➜OFF: Select this when you want to enjoy the surround sound with its full dynamic range.

➜ON: Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.

This feature is only available for movies with Dolby Digital mode.