Plug the power cords of the DVD Player, Stereo, and the TV into an active power outlet. Press STANDBY-ON y on the front of the DVD Player to turn it on.
Turn on the Stereo and set it to the correct Audio In channel or sound source. Refer to the Stereo owner’s manual for details.
Connect the supplied video cable to the yellow VIDEO (VIDEO OUT) jack of the DVD Player and to the TV’s VIDEO IN jack. The supplied video cable has yellow markings.
14 Hookups (cont’d)
Connecting to a TV and a
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Back of TV | Stereo |
(example only) | (example only) |
1 |
|
| LEFT AUDIO IN |
VIDEO IN |
|
| RIGHT AUDIO IN |
2
3
1
2 Connect the supplied audio cable to the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors.
3
4
5 Turn on the TV. Set it to the correct Video In channel. See your TV owner’s manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the DVD screen on the TV.
Helpful Hint
• If you prefer or need to use the