Philips DVD727 owner manual Display Dim, Analog Output, Press 4 to select Display DIM, then press

Display Dim, Analog Output 39

Display Dim

You can adjust the brightness of the display panel on the front of the Player by following these steps.

1

2

3

Press SYSTEM MENU.

GENERAL SETUP will be selected. Press OK.

Press 4 to select DISPLAY DIM, then press 2.

- - GENERAL SETUP PAGE - -			1,5
OSD LANGUAGE		2-4
DISC LOCK	40%
PROGRAM
DISPLAY DIM	F 100%
SCREEN SAVER	70%

MAIN PAGE

4

5

Press 3 or 4 to select 100%, 70%, or 40%, then press OK. The display panel will dim or brighten according to your choice.

Press SYSTEM MENU to remove the menus.

Analog Output

Use ANALOG AUDIO SETUP to adjust some of the Player’s audio settings. Adjust DOWNMIX according to how you connected the Player to your TV and/or Stereo. Balance the volume during playback by adjusting Dynamic Range Control (D.R.C.).

1

2

3

4

Press SYSTEM MENU.

Press 4 to select ANALOG AUDIO SETUP. Press OK.

Press 3 or 4 to select DOWNMIX or D.R.C., then					1,5
press 2 and follow step 4 according to your choice.				2-4
• If you selected DOWNMIX, press 3 or 4 to select LT/RT
(left/right) or STEREO, then press OK. Choose LT/RT if you
connected the Player to a stereo that has Dolby Pro Logic. Details are
on page 14. Select STEREO if you connected the Player to a TV or
Stereo that has left and right Audio In jacks but does not have Dolby
Pro Logic.
• If you selected D.R.C., press 3 or 4 to select ON or OFF, then
press OK. To level the volume during Disc playback, choose ON.There
will not be such a large range between the loudest and softest parts of the
sound.To hear the highs and lows of the volume, set D.R.C. to OFF.
- - ANALOG AUDIO SETUP PAGE - -		- - ANALOG AUDIO SETUP PAGE - -
DOWNMIX	F LT/RT	DOWNMIX
D.R.C.	STEREO	D.R.C.	F ON
SOUND MODE		SOUND MODE	OFF
REVERB MODE		REVERB MODE

MAIN PAGE MAIN PAGE

5 Press SYSTEM MENU to remove the menus.