E n g l i s h
Connecting to TV (cont’d)
Option 2: Using S-Video (Y/C) socket
Antenna or
Satellite/Cable TV signal
1 | 2 |
|
| 3 | |
|
|
5
TV
4
This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and colour signal (C signal) separately. This mini DIN socket is also called a Hosiden jack.
Have the following cables ready:
1)Antenna cable
2)
3)Audio cables (red/white, not supplied)
1Turn off your TV and remove the antenna cable from your TV (or Satellite Receiver/ Cable Box). Insert it into the ANTENNA IN socket at the back of the DVD recorder.
2Use the supplied antenna cable to connect the DVD recorder’s TV OUT socket to the antenna input socket at the back of your TV set
3Use an
10
1DVDR6xx_Eng05_14134c10
4Use an audio cable (red/white) to connect the DVD recorder’s AUDIO L/R OUT socket to the audio input socket at the back of your TV set (or labelled as AV In or Audio In).
5Connect the power cable from the DVD recorder’s ~ MAINS to the power supply.
6Press
recorder to turn it on.
➜ The message 'IS THE TV ON?' appears on the display panel.
7Turn on the TV power. Select the correct Video In channel at the TV (see page 8).
➜The first installation menu
{Language and Country } will appear on the TV.
8Proceed to page 19 to continue the first installation.
3139 246 14134
9/28/04, 11:19 AM