If you connected the Player’s red and white AUDIO OUT or FRONT MULTICHANNEL AUDIO OUT jacks to a Stereo as shown on page 13, or if you connected the Player to a
Check your Stereo or Receiver and see if it is compatible with Dolby Surround. Then, follow these steps to choose the Analog Output setting that is most compatible with your equipment.
1 Press SYSTEM MENU. |
| will be selected. | |
| |||
2 Press 4 repeatedly to select G, then press 2. |
3 Press 4 to select Analog output, then press 2. Analog output may be selected already. If so, just press 2 to continue.
4 Press 3 or 4 to select Stereo, Dolby
●Select Stereo if your audio equipment is not compatible with Dolby Surround, or if you connected the Player to a TV only or to a Stereo with Right/Left Audio In jacks.When you play Discs that were recorded in Dolby Digital 5.1, the sound will be mixed into the appropriate Stereo sound that will be acceptable by your
●Select Dolby
●Select 3D Sound if you did not connect any rear or surround speakers to the Player, but still want the effect of surround sound.
●Select
The
Analog Output 41
POWER
2
1 | 2 | 3 | 1,5 |
7 | 8 | 9 | |
4 | 5 | 6 |
|
RETURN |
| DISPLAY |
|
| 0 |
|
|
| É | SYSTEM |
|
| MENU |
| |
É | OK | É |
|
G | É | H |
|
STOPPLAYPAUSE
ÇÉ Å
SUBTITLE ANGLE ZOOM AUDIO
REPEAT REPEAT SHUFFLE SCAN
| Digital output |
|
| Analog output | spStereo |
G | Night mode | Dolby |
| Clear Voice | 3D sound |
r | Real Surround |
CD Upsampling
Speakers
5 Press SYSTEM MENU to remove the menus.
Helpful Hints
•
•Set Analog output simply in the System Menu Bar during DVD
or Video CD playback. Press SOUND MODE to select d. Within five seconds, press 3 or 4 to select st, sur, 3d, or 6ch.
•If you set Analog output to Multi- channel, adjust the speakers as described on page 45.
•