Philips DVP1033/51 user manual Troubleshooting, Picture, Sound, Play

Page 16

8 Troubleshooting

Warning

‡Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.

If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back of your product.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Main unit

The buttons on this unit do not work.

‡ Disconnect this product from the power outlet for a few minutes, then connect again.

No reaction to the remote control.

‡ Connect this product to the power outlet. ‡ Point the remote control at the IR sensor located on the front panel of this product.

‡ Insert the batteries correctly.

‡ Insert new batteries in the remote control.

Picture

No picture.

‡See the TVs user manual on how to select the correct input on the TV. Change the TV channel until you see the Philips screen.

‡If you have turned on the progressive scan setting or change the TV system setting, switch back to default mode: 1) Pressto open the disc compartment. 2) Press the Numeric button¶· (for progressive scan) or the Numeric button·· (for TV system).

Sound

No audio output from the TV.

‡ Ensure that the audio cables are connected to the audio input of the TV.

‡ Assign the audio input of the TV to the corresponding video input. See the TV user manual for details.

No audio output from the loudspeakers of the DXGLRGHYLFH VWHUHRV\VWHPDPSOLÀHUUHFHLYHU 

‡ Ensure that the audio cables are connected to the audio input of the audio device.

‡ Turn on the audio device to its correct audio input source.

No sound during DivX video playback

‡ The audio codec may not be supported by this product.

Play

The disc cannot be played.

‡The disc is badly scratched, deformed, or dirty. Replace or clean the disc.

‡8VHWKHFRUUHFWGLVFIRUPDWRUÀOHIRUPDW

'LY;YLGHRÀOHVFDQQRWEHSOD\HG

‡(QVXUHWKDWWKH'LY;YLGHRÀOHLVFRPSOHWH

‡(QVXUHWKDWWKHÀOHQDPHH[WHQVLRQLVFRUUHFW

The aspect ratio of the screen is not aligned with theTV display setting.

‡ 7KHDVSHFWUDWLRLVÀ[HGRQWKHGLVF

DivX subtitles are not displayed correctly.

‡(QVXUHWKDWWKHVXEWLWOHÀOHQDPHLVWKHVDPH DVWKHPRYLHÀOHQDPH

‡Select the correct character set. ‡ Press SETUP.

‡ Select [Preferences] > [DivX Subtitle] in the menu.

‡ Select the character set that supports the subtitle.

English

EN 17

Image 16
Contents Register your product and get support at DVP1033RU ǝȀǷǻǯǻDZǾǿǯǻǼǻǸȉǴǻǯǭǿDzǸȌ Contents Safety and important notice Trademark noticeAbout Progressive Scan Disposal of your old product and batteriesPlayable media Your DVD playerProduct overview Connect Connect audio/video cables‡ 5HSHDWSOD\IRUDVSHFLÀFVHFWLRQ RISKRWRÀOHV ‡ &RQÀUPDQHQWU\RUVHOHFWLRQConnect power Optional audio connectionsConnect an analogue stereo system RQQHFWWRGLJLWDODPSOLÀHUUHFHLYHUSelect a menu display language Prepare the remote controlTurn on progressive scan Play a disc PlayPlay video Play music Play photo Adjust settings Audio setup‡ To exit the menu, press SETUP. TV System Video setupMake loud sound level softer and soft sound level Picture Setting ‡ Off Turn off progressive scan modePreferences PBC ÀUVWWUDFNÀHOG 9HUVLRQ,QIR@Update software Additional informationCare DVHUVSHFLÀFDWLRQTroubleshooting PictureSound PlayAspect ratio DivX Video-On-DemandMP3 Progressive scanLanguage Code ‹.RQLQNOLMNH3KLOLSVOHFWURQLFV19