7 Additional information
Update software
For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website.
Caution
Power supply must not be interrupted during software upgrade.
Press SETUP.
2Select [Preferences] > >9HUVLRQ,QIR@, and then press OK.
3 :ULWHGRZQWKHÀOHQDPHDQGWKHQSUHVV SETUP to exit the menu.
Visit www.philips.com/support to check for
WKHODWHVWVRIWZDUHYHUVLRQXVLQJWKHÀOHQDPH for this product.
5Refer to the upgrade instructions on the website for more information.
Note
Disconnect the power cord for a few seconds and connect again to turn on the product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners available commercially, or
Clean discs
:LSHWKHGLVFZLWKDPLFURÀEUHFOHDQLQJFORWKIURP the centre to the edge in a straight line movement.
6SHFLÀFDWLRQV
Note
6SHFLÀFDWLRQDQGGHVLJQDUHVXEMHFWWRFKDQJHZLWKRXW notice
Video
Signal system: PAL / NTSC
Composite video output: 1 Vpp ~ 75 ohm
Component video output: 0.7 Vpp ~ 75 ohm Audio
Analog stereo output
Signal to noise ratio (1 kHz): > 90 dB
Dynamic Range (1 kHz): > 80 dB
Crosstalk (1 kHz): > 80 dB
Distortion/noise: (1 kHz): > 70 dB
MPEG MP3: MPEG Audio L3 Digital output
Coaxial Main Unit
Dimensions (w x h x d): 260 x 55 x 220 (mm)
Net Weight: 1.40 kg Power
Power supply rating: 230V, 50HZ
Power consumption: < 10 W
Power consumption in standby mode: < 1 W Accessories supplied
Remote control and batteries Audio/Video cables
User Manual
/DVHUVSHFLÀFDWLRQ
Type: Semiconductor laser InGaAIP (DVD), AIGaAs (CD)
Wave length: 655 nm (DVD), 790 nm (CD)
Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)
Beam divergence: 60 degrees
16EN