Samsung STB-E7900/EN, STB-E7500/EN AllShare Settings, Device Name, Upgrading Software, Online

AllShare Settings

The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the product, deny access, or delete the device from the AllShare list.

1.In the Home screen, select Settings, and then press the v button.

2.Select Network, and then press the v button.

3.Select AllShare Settings, and then press the v button.

4.Select Device List, and then press the v button. In the Device List, select a device, and then press the v button.

The AllShare Settings pop-up appears.

5.Select Allow, Deny, or Delete from List, and then press the v button.

The AllShare Settings screen only displays devices if you have estblished network connections to AllShare devices. For more information about AllShare networked devices, see page 39.

NOTE

\\ The "Share hard drive" option should be set to On to share the contents through AllShare function.

Device Name

Lets you input a name for the product that will identify it on your networks.

Upgrading Software

The software Update menu allows you to upgrade the product's software for performance improvements or additional services.

•Never turn the product off or back on manually during the update process.

1.In the Home screen, select the Settings, and then press the v button.

2.Select Support, and then press the v button.

3.Select Software Update, and then press the v button.

4.Select one of the following methods:

• Online

• By Channel

• By USB

• By Downloaded

• Standby Mode Upgrade

5.Press the v button.

NOTE

\\ The upgrade is complete when the product turns off, and then turns on again by itself.

\\ Samsung Electronics shall takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software Update.

\\ If you want to cancel the upgrade while the upgrade software is downloading, press the v button.

Online

Your product must be connected to the Internet to use the Online function.

1.Select Online, and then press the v button. The Connecting to Server message appears.

2.If there is a download available, the Download pop-up appears with a progress bar and the download starts.

3.When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade.

4.If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically.

5.If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. You can upgrade the software later using the By Downloaded function.

6.If you select Don't Upgrade, the product cancels the upgrade.

04 Settings

English 35