Settings

By Channel

Upgrade software using the broadcasting signal.

By USB

1.Visit www.samsung.com.

2.Click SUPPORT on the top right of the page.

3.Enter the product's model number into the search field, and then click Find Product.

4.Click Get downloads in the centre of the page below the Downloads header.

5.Click Firmware in the centre of the page.

6.Click the ZIP icon in the File column on the right side of the page.

7.Click OK in the pop-up that appears to download and save the firmware file to your PC.

8.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.

9.Copy the folder to a USB flash drive.

10.Insert the USB flash drive into the USB port of the product.

11.In the product's menu, go to Settings > Support > Software Update.

12.Select By USB.

NOTE

\\ When the software Update is done, check the software details in the software Update menu.

\\ Do not turn off the product during the software Update. It may cause the product to malfunction.

\\ Software Updates using the USB Host jack must be performed with a USB flash memory stick only.

By Downloaded

The By Downloaded option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode.

1.If upgrade software has been downloaded, you will see the software version number to the right of By Downloaded.

2.Select By Downloaded, and then press the v button.

3.The product displays a message asking if you want to upgrade. Select Yes. The product begins the upgrade.

4.When the update is complete, the product turns off automatically, and then turns on.

NOTE

\\ When the system upgrade is done, check the software details in the software Update menu.

\\ Do not turn off the product during the software Update. It may cause the product to malfunction.

Standby Mode Upgrade

You can set the Standby Mode Upgrade function so that the product downloads new upgrade software when it is in Standby mode.

In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

1.Press the ▲▼ buttons to select Standby Mode Upgrade, and then press the v button.

2.Select the desired time.

If you select the desired time, the upgrade is automatically performed time.

NOTE

\\ To use Standby Mode Upgrade function, your product must be connected to the Internet.

36 English

Page 36
Image 36
Samsung STB-E7500/EN, STB-E7900/EN manual By Channel, By USB, By Downloaded, Standby Mode Upgrade