Samsung STB-E7500/EN, STB-E7900/EN manual Digital Output Selection, Pcm, Broadcast, Optical

Appendix

NOTE

\\ DTV smart resolution is activated only when resolution option is set to Auto.

\\ If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message "If no pictures are shown after selecting Yes, please wait for 15 seconds before returning to the previous resolution. Do you want to change the resolution?" appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.

\\ If the screen stays blank after you have changed the resolution and then press and hold the @ button on the front of the product for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

Digital Output Selection

Setup		PCM		Bitstream
				(Unprocessed)
Connection		HDMI supported	Optical	HDMI supported	Optical
		AV receiver		AV receiver
Audio Stream of	Dolby Digital	PCM 2ch	PCM 2ch	Dolby Digital*	Dolby Digital*
	Dolby Digital Plus	PCM 2ch	PCM 2ch	Dolby Digital Plus*	Dolby Digital*
Broadcast	MPEG1 Layer 2	PCM 2ch	PCM 2ch	PCM 2ch	PCM 2ch
	HE-AAC	Up to PCM 5.1ch	PCM 2ch	Re-encoded DTS**	Re-encoded DTS**

*If the Audio Description is set to On, the output will be PCM 2ch.

**If HE-AAC Source Stream is 2ch or 1ch, Output will be 2ch PCM.

66 English