Philips DVP3320 Get started, Prepare the remote control, Navigate the menu, Enters numbers

4 Get started

Prepare the remote control

1Push to open the battery compartment cover.

2Insert 2 AAA batteries with correct polarity (+/-) as indicated.

3Close the cover.

Caution

•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

•Do not mix batteries (old and new or carbon and alkaline, etc.).

•Batteries contain chemical substances, they should be disposed of properly.

Navigate the menu

Get started English

1Point the remote control directly at the remote sensor on this DVD player and select the desired function.

2Use the following buttons on the remote control to navigate through the on-screen menus.

Button	Action
	Moves up or down.
	Moves left or right.
OK	Con rms a selection.
	Enters numbers

Find the correct viewing channel

1 Press to turn on the DVD player.

2Turn on the TV and switch to the correct video-in channel in one of the following ways:

•Go to the lowest channel on your TV, then press the Channel Down button until you see the Philips screen.

•Press SOURCE button repeatedly on the remote control of your TV.

EN 11

GYSBHQLQGG6HF