3 Connect
Make the following connections to use your DVD player.
Basic connections:
•Video
•Audio
Optional connections:
•Route audio to other devices:
•Digital ampli er/receiver
•Analog stereo system
Note
•Refer to the type plate at the back or bottom of the product for identi cation and supply ratings.
•Before you make or change any connections, ensure that all the devices are disconnected from the power outlet.
Tip
•Different types of connectors may be used to connect this product to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide.philips.com.
Note
•You must connect this DVD player directly to a TV.
Option 1: Connect to component video jacks
Pb
| Pr | Pb | Y |
| COMPONENT | ||
Y | Pr | VIDEO IN |
|
COMPONENT VIDEO OUT
1Connect the component video cables (not supplied) to the Y Pb Pr jacks on this DVD player and the component video input jacks on the TV.
•If a progressive scan TV is used, you may turn on the progressive scan mode.
Tip
•The component video input jacks on the TV may be labeled as Y Pb/Cb Pr/Cr or YUV.
•This type of connection provides good picture quality.
Connect video cables
Connect this DVD player to TV to view disc play. Select the best video connection that the TV can support.
•Option 1: Connect to component video jacks (for a standard TV or Progressive Scan TV).
•Option 2: Connect to video (CVBS) jack (for a standard TV).
8EN
GYSBHQLQGG6HF
Option 2 : Connect to video (CVBS) jack
VIDEO IN
1Connect a composite video cable (supplied) to the TV OUT jack on this