Philips DVP3721X/94 user manual Setting up, Progressive Scan feature

		Getting Started (continued)
		G Select { On }, then press OK to confirm.
	Step 3 : Setting up
		The menu will appear on the TV.
	Progressive Scan feature
			ACTIVATING PROGRESSIVE SCAN:
	(for Progressive Scan TV only)		1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
			2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
	The progressive scan displays twice the		3. IF THERE IS A DISTORTED PICTURE, WAIT
				15 SECONDS FOR AUTO RECOVERY.
	number of frames per seconds than
					OK		CANCEL
	interlaced scanning (ordinary normal TV
	system). With nearly double the number	H Press W to highlight { OK } and press
	of lines, progressive scan offers higher
	picture resolution and quality.	OK to confirm.
	Before you start...	I Turn on your TV progressive scan mode
		(refer to your TV user manual).
	– Ensure that you have connected this
		The menu will appear on the TV.
	DVD player to a progressive scan TV
	using the YPbPr connection (see page
10).				CONFIRM AGAIN TO USE PROGRESSIVE
	– Ensure that you have completed the			SCAN. IF PICTURE IS GOOD,
				PRESS OK BUTTON ON REMOTE.
	basic installation and setup.
					OK	CANCEL

A Turn on your TV and set to interlace	J Press W to highlight { OK } and press
mode (refer to your TV user manual).
	OK to confirm.
B Press STANDBY-ON 2 on the
	The setup is now completed and you
remote control to turn on the DVD
	can start enjoy the high quality
player.
	picture.
C Select the correct video-in channel.	To deactivate Progressive Scan
The DVD background menu appears.
	manually:

English

DPress SETUP.

EPress X to select { Video Setup Page }.

- - Video Setup Page - -

TV Type
TV Display
Progressive	On
Picture Setting	Off

Set Progressive TV mode

FPress S T repeatedly to select { Progressive }, then press X.

Wait for 15 seconds for the auto recovery.

OR

APress OPEN/CLOSE ç on the DVD player to open the disc tray.

BPress numeric keypad ‘1’ on the remote control for few seconds.

The DVD background screen appears.

Tip:

– There are some progressive scan TVs and High-Defi nition TVs that are not fully compatible with this unit, resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, turn off the progressive scan feature on both the DVD player and your TV.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

17

01-45_dvp3120_94_eng1.indd 17 2007-01-29 4:44:29 PM