•[Auto Standby]: Enable or disable auto standby. If enabled, this player switches automatically to standby after 15 minutes of inactivity (for example, in pause or stop mode).
•[DivX(R) VOD Code]: Display the DivX® registration code and deregistration code.
Picture
1 Press 
.
2 Select [Setup] > [Video] to access the video setup options.
•[TV System]: Select a TV system that matches your TV. By default, this setting matches the common TVs in your country.
•[Aspect ratio]: Select a picture display format to fit the TV screen.
•[Progressive]:Turn on or off the progressive scan mode. If a progressive scan TV is connected to this player, turn on the progressive scan mode.
•[Picture Setting]: Select a predefined color setting, or customize a setting.
•[Closed Caption]: Enable this feature to show the sound effects in subtitles. Applicable only when both a disc and a TV support this feature.
•[HD JPEG]:Enable this feature to view
•[HDMI Setup]:Set up for HDMI connection.
•[Resolution]:Select a resolution for high definition videos.
•[HDMI Deep Color]:Create vivid images with more color details when the video content is recorded in Deep Color and the
TV supports this feature.
•[Wide Screen Format]:Select a display format for wide screen videos.
•[EasyLink Setup]:See “Use your DVD player” > “Use Philips EasyLink” for details.
Note
•To achieve progressive scan pictures, make sure that your TV supports the progressive scan feature, and your TV is connected to this player through the Y/Pb/ Pr connectors.
Sound
1 Press 
.
2 Select [Setup] > [Audio] to access the audio setup options.
•[Analogue Output]: Select an audio format for sound output when this player is connected through the AUDIO OUT L/R connectors.
•[Digital Audio]: Select an audio format for sound output when this player is connected through the COAXIAL connector.
•[Digital Output]: Select a type
of digital output: [Off] - Disable digital output; [All] - Support
•[LPCM Output]: Select a LPCM (Linear Pulse Code Modulation) output sampling rate.The higher the sampling rate, the better the sound quality. [LPCM Output] is enabled only when [PCM Only] is selected under [Digital Output].
•[HDMI Audio]: Enable or disable the audio output through HDMI connection.
•[Audio Sync]: Set a delay time for audio output to match the video play.
•[Volume]: Change a volume level.
•[Sound Mode]: Select a preset sound effect.
12EN