Philips DVP3588K user manual Use Philips EasyLink, Play a disc, Play video

Page 8

1Turn on the TV to the correct viewing channel for this product.

2Press SETUP.

3Press to select [Video Setup].

4Select [Progressive] > [On], and then press OK. » A warning message is displayed.

5To proceed, select [Ok] and then press OK. » The progressive setup is complete.

Note

If a blank/distorted screen is displayed, wait for 15 seconds for the auto recovery.

If no picture is displayed, turn off the progressive scan mode as follows:

1)Press to open the disc compartment.

2)Press the Numeric button ‘1’.

6Press SETUP to exit the menu.

7You can now turn on the progressive scan mode on the TV (see the TV user manual).

Note

During play, when the progressive scan mode is on for both this product and the TV, distorted picture may display. In this case, turn off the progressive scan feature on both this product and the TV.

Use Philips EasyLink

This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.

Note

To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other devices connected to TV. Refer to the TVs/devices manual for details.

One-touch play

1Press to turn on this product.

»TheTV (if supports one-touch play) automatically turns on and switches to the correct video-in channel.

»If a disc is loaded in this product, disc play automatically starts.

One-touch standby

1Press and hold on the remote control for more than 3 seconds.

»All the connected devices (if the device supports one-touch standby) automatically switch to standby.

Note

Philips does not guarantee 100% interoperability with all HDMI CEC devices.

5 Play

Play a disc

Caution

Do not place any objects other than discs into the disc compartment.

Do not touch the disc optical lens inside the disc compartment.

1Press to open the disc compartment.

2Insert a disc with its label facing up.

3Press to close the disc compartment and start disc play.

Note

Check the types of discs supported (see “Your DVD player” > “Playable media”).

If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental Control]).

Play video

Note

Some operations may not work with some discs. See the information accompanying the disc for details.

English

EN 9

Image 8
Contents Register your product and get support at Contents Safety and important notice Trademark noticeAbout Progressive Scan Disposal of your old product and batteriesProduct overview Your DVD playerPlayable media Connect Connect audio/video cablesOption 1 Connect to the Hdmi jack Select the best video connection that TV can supportOptional audio connections Get started Play Use Philips EasyLinkPlay a disc Play videoAccess DVD menu AccessVCD menuPreview disc contents Control video playPlay music Advanced features Play photoPlay from a USB fl ash drive Media copyCreate MP3 fi les KaraokeAdjust settings General setupAdjust Karaoke settings Record KaraokeHdmi Audio Audio setupPress Setup » General Setup menu is displayed Video setup HD JpegPreferences » Disc play starts if there is a disc in this productUpdate software Additional informationCare PBCTroubleshooting Specifi cationsPicture SoundGlossary Play