[Speaker Setup]
Optimize the surround output for the connected speakers.
[CD Upsampling]
For better sound quality in stereo mode, convert the music CD to a higher sampling rate.
•[Off] - Turn off
•[88.2kHz] - Convert to twice the original sampling rate.
•[176.4kHz] - Convert to four times the original sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[On] - Enjoy quiet viewing at night.
•[Off] - Enjoy surround sound with a full dynamic range.
Note
•Applicable only to Dolby Digital encoded DVDs.
Video setup
1Press SETUP.
» [General Setup] menu is displayed.
2Press 
to select [Video Setup], and then press 
.
3Select an option, and then press OK.
4Select a setting, and then press OK.
•To return to the previous menu, press 
.
•To exit the menu, press SETUP.
[TV System]
Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.
•[PAL] - For a
•[Multi] - For TV that is compatible with both PAL and NTSC.
•[NTSC] - For an
[TV Display]
Select a display format:
•[4:3 Pan Scan] - For a 4:3 screen TV:
•[4:3 Letter Box] - For a 4:3 screen TV: wide- screen display with black bars on the top and bottom of the screen.
•[16:9] - For a
If a progressive scan TV is connected to this product, turn on the progressive scan mode.
•[On] - Turn on progressive scan.
•[Off] - Turn off progressive scan mode.
Note
•For more detailed description, see “Get started” > “Turn on progressive scan”.
[Picture Setting]
Select a predefi ned set of picture color settings or customize the personal setting.
•[Standard] - Original color setting.
•[Bright] - Vibrant color setting.
•[Soft] - Warm color setting.
•[Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color
saturation, then press OK. [My Wallpaper]
Select a picture as the wallpaper.
•[Default picture] - The default wallpaper preset as the Philips logo.
•[Saved picture] - A captured video image or JPEG photo.
•[Current picture] - Capture a video image or JPEG photo and save it on the product.
1.Play a video or photo slideshow.
2.Select a video image or photo: press 
to pause, and then press SETUP.
3.Navigate to the option ([Video Setup] > [My Wallpaper] > [Current picture]).
4.Press OK to confi rm.
»One video image or JPEG photo is saved as wallpaper.
»A newly saved image or photo replaces the earlier one.
[HD JPEG]
Enjoy untouched and uncompressed JPEG pictures at its original resolution when you connect this product and the TV with an HDMI cable.
•[On] - Display high defi nition picture.
•[Off] - Display standard picture.
16EN