Philips DVP3588/94 Access DVD menu, AccessVCD menu, Preview disc contents, Display play time

Page 10

Access DVD menu

1Press DISC MENU to access the disc root menu.

2Select a play option, then press OK.

In some menus, press the Numeric buttons to input your selection.

AccessVCD menu

The PBC (playback control) feature is available for VCD/SVCD, which can display the contents menu for you to select a play option. The PBC is on by default in the factory.

Note

See “Adjust settings” > “Preferences” > [PBC] on how to turn PBC on or off.

1 Display the contents menu via one of the following ways:

If PBC is on, load in a VCD/SVCD.

During play with PBC on, press BACK.

2Press the Numeric buttons to select a play option, and then press OK to start play.

If PBC is turned off, it skips the menu display and starts play from the fi rst track.

Preview disc contents

1During play, press INFO.

» The disc status menu is displayed.

2Select [Preview], and then press .

3Select a preview option, and then press OK. » A thumbnails preview screen is displayed.

To go to the next/previous preview screen, select [Prev] or [Next], and then press OK.

To start play, press OK at the selected thumbnail picture.

Skip play to a specifi c time

1During play, press INFO.

» The disc status menu is displayed.

2Select an option for the current elapsed playing time, and then press .

[TT Time] (title time)

[CH Time] (chapter time)

[Disc Time]

[Track Time]

3Press the Numeric buttons to enter the time to skip to, then press OK.

Display play time

1During play, press INFO.

» The disc status menu is displayed.

2Select [Time Disp.], and then press .

» The display options vary from disc type.

3Select an option, and then press OK.

View DVD play from different angles

1During play, press INFO.

» The disc status menu is displayed.

2Select [Angle], and then press.

3Press the Numeric buttons to change the

angle.

» Play changes to the selected angle.

Note

Applicable only to discs that contain multi-angle scenes.

Repeat play for a specifi c section

1During play, press REPEAT/REPEAT A-B at the start point.

2Press REPEAT/REPEAT A-B again to set the

end point.

» Repeat play starts.

3To cancel repeat play, press REPEAT/REPEAT A-B again.

Note

The marked section for repeat play is only possible within a track/title.

Play DivX® (Ultra) video

DivX® (Ultra) video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX® (Ultra) video on this DivX (Ultra) certifi ed product.

1Insert a disc or USB fl ash drive that contains

the DivX (Ultra) videos.

For USB, press .

»A contents menu is displayed.

2Select a title to play, then press OK.

• You may select subtitle/audio language.

English

EN 11

Image 10
Contents DVP3588 Register your product and get support atContents About Progressive Scan Safety and important noticeTrademark notice Disposal of your old product and batteriesProduct overview Your DVD playerPlayable media Region codesRemote control Connect audio/video cables ConnectOptional audio connections Get started Connect powerPrepare the remote control Connect USB fl ash driveFind the TV input channel Turn on progressive scanSelect menu display language Play a disc PlayUse Philips EasyLink Play videoPreview disc contents Access DVD menuAccessVCD menu Skip play to a specifi c timePlay music Play photoMedia copy Other featuresPlay from a USB fl ash drive Control photo playCreate MP3 fi les Adjust settingsGeneral setup Select Yes in the menu, and then press OKAudio setup Hdmi AudioVideo setup Saved picture a captured video image or Jpeg photo PreferencesHD Jpeg PBC Enter the new password at New Password fi eldAudio Press OK to exit the menuAdditional information TroubleshootingUpdate software CareSound GlossaryPicture PlayMP3 HdmiJpeg Progressive scanPage Language Code